A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Throttle Body Mazda MX-5 / MX-5 Miata LFE213640A K4238 0811003463J19 0811003463J16
Vendors's code: K4238
Product code: LFE213640A
Barcode:
Code 39:
ISBN:
€81.30
Price
€81.30
€100.00
Price
€100.00
Ask about the product
Throttle Body Mazda MX-5 / MX-5 Miata LFE213640A K4238 0811003463J19 0811003463J16
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the LFE213640A throttle body fit your car?
This is a used, working throttle body with part numbers LFE213640A, K4238 and 0811003463J19, for: Mazda MX-5 / MX-5 Miata (engines: 1.8 L). Before ordering, compare the number with the label on the throttle body fitted to your car.
Throttle Body LFE213640A K4238 – Mazda MX-5 / MX-5 Miata
The job of the LFE213640A throttle body is to meter the air entering a petrol engine. In electronic throttle bodies, the throttle plate position is set by the engine control unit based on the accelerator pedal signal. According to the product data, it fits: Mazda MX-5 / MX-5 Miata; engines: 1.8 L.
Choosing by part number
- LFE213640A – also printed as LFE2 13 640 A
- K4238
- 0811003463J19
- 0811003463J16
Check whether the throttle body in your car carries the number LFE213640A, K4238 or 0811003463J19. Knowing only the model (Mazda MX-5 / MX-5 Miata) is not enough to choose the part: different throttle body versions were used in the same cars.
Common throttle body faults
When the throttle body in a Mazda starts to fail, the most common signs are:
- worn track in the throttle position sensor – fluctuating revs, jerking on light throttle,
- carbon deposits on the throttle plate – rough idle, engine stalling when coming to a stop,
- in electronic throttle bodies: failed motor or gear drive – limp mode, reduced power, engine warning light.
If cleaning does not help and diagnostics point to a throttle body or position sensor fault, replacement with a part carrying the same number is usually required. After fitting, many cars need an adaptation according to the vehicle manufacturer's procedure.
Questions and answers
| How do I check that the LFE213640A throttle body fits my car? |
|---|
| Compare the number LFE213640A, K4238 or 0811003463J19 with the label of the throttle body fitted to your car (Mazda MX-5 / MX-5 Miata). |
| Which engines does the LFE213640A throttle body fit? |
| According to the product data, it fits 1.8 L engines in: Mazda MX-5 / MX-5 Miata. |
| Does the throttle body need to be adapted (relearned) after replacement? |
| In many cars, yes: after fitting, the engine control unit learns the end positions of the throttle. This is done with a diagnostic tool or by following the procedure described by the car manufacturer. |
| What condition is this throttle body in? |
| It is a used part in good working condition. The warranty period is shown in the product specification table. |
Not sure if this throttle body fits your car? Send us the number from the label on your part and we will check compatibility before shipping.
