A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Throttle Body Smart Fortwo (451) Mikuni 40002 97090247
Vendors's code: 40002
Product code: 97090247
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Throttle body 40002 Mikuni – is it the right part for your car?
This is a used, working Mikuni throttle body with part numbers 40002 and 97090247, for: Smart Fortwo (451) (engines: 1.0). Before ordering, compare the number with the label on the throttle body fitted to your car.
Throttle Body Mikuni 40002 97090247 – Smart Fortwo (451)
The job of the 40002 throttle body is to meter the air entering a petrol engine. In electronic throttle bodies, the throttle plate position is set by the engine control unit based on the accelerator pedal signal. According to the product data, it fits: Smart Fortwo (451); engines: 1.0.
Choosing by part number
- 40002
- 97090247
Check whether the throttle body in your car carries the number 40002 or 97090247. Knowing only the model (Smart Fortwo (451)) is not enough to choose the part: different throttle body versions were used in the same cars.
Common throttle body faults
Typical symptoms of throttle body problems in Smart cars:
- worn track in the throttle position sensor – fluctuating revs, jerking on light throttle,
- carbon deposits on the throttle plate – rough idle, engine stalling when coming to a stop,
- in electronic throttle bodies: failed motor or gear drive – limp mode, reduced power, engine warning light.
When measurements or fault codes confirm the problem and cleaning has no effect, the throttle body is replaced with one carrying the same number. After replacement, many cars need an adaptation in the engine control unit.
Frequently asked questions
| How do I check that the 40002 throttle body fits my car? |
|---|
| Compare the number 40002 or 97090247 with the label of the throttle body fitted to your car (Smart Fortwo (451)). |
| Which engines does the 40002 throttle body fit? |
| According to the product data, it fits 1.0 engines in: Smart Fortwo (451). |
| Does the throttle body need to be adapted (relearned) after replacement? |
| In many cars, yes: after fitting, the engine control unit learns the end positions of the throttle. This is done with a diagnostic tool or by following the procedure described by the car manufacturer. |
| What condition is this throttle body in? |
| It is a used, working unit in good condition. The warranty is listed in the product specification table. |
Need help choosing a part for your Smart? Send us the number from your throttle body's label and we will confirm whether this part will fit.