Vendors's code: 8966117610
Product code: 5E07-6443E
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
The ECU module DENSO 1752004622 with part number 8966117610 is used in selected Toyota models. The controller is responsible for managing engine operating parameters, fuel injection control, and proper communication with the vehicle’s electronic systems. This solution is dedicated to specific engine versions – it is recommended to verify the part number with the currently installed unit before purchase.
FAQ – ECU Engine Controller TOYOTA DENSO 1752004622 / 8966117610
What is the function of the 1752004622 controller in Toyota vehicles?
The module with part number 1752004622 is responsible for electronic engine management. It analyzes data from sensors and, based on this information, regulates fuel injection, ignition timing, and other parameters affecting engine performance and smooth operation.
Does the number 8966117610 refer to the same engine controller?
Yes, 8966117610 is the catalog number used by the vehicle manufacturer, while 1752004622 is the identification number assigned by DENSO. Both refer to the same type of ECU Engine controller.
In which Toyota models is controller 8966117610 used?
The engine computer 8966117610 was installed in selected Toyota versions depending on the production year and engine variant. Exact compatibility should be confirmed by comparing the number with the existing module or verifying via VIN.
How can I check if 1752004622 is compatible with my car?
The best way is to read the number directly from the current ECU housing. If it shows 1752004622 or 8966117610, it indicates compatibility in terms of part identification. If unsure, it is recommended to verify using the VIN.
Why does the controller have two different numbers?
The dual numbering comes from different systems – one number (e.g. 1752004622) is assigned by the electronics manufacturer, while the other (8966117610) is used in Toyota catalogs. The difference concerns only the numbering format, not the technical specifications.
How to effectively search for ECU 8966117610 online?
The best results are achieved by entering the full number, e.g. 8966117610 Toyota or DENSO 1752004622. Using both designations increases the chance of finding the correct unit for a specific engine.
Is adaptation required after replacing controller 1752004622?
In most cases, yes. After installation, programming, immobilizer synchronization, or configuration for the specific vehicle may be required. This is a standard procedure when replacing an engine controller.
What should I do if 8966117610 turns out to be incompatible?
In such a case, verify the markings of the old module and contact the seller providing the part number and vehicle details. This will allow selecting the correct controller compatible with your Toyota engine version.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
