A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Vacuum control valve Hyundai Kia 351202A900 70027202
Vendors's code: 351202A900
Product code: F89B-94231
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the vacuum control valve 351202A900 fit your car?
This is a vacuum control valve with the number 351202A900 for Hyundai Kia. The part is used, working and in good condition. Before ordering, compare the number with the one on your part.
Vacuum control valve Hyundai Kia 351202A900 70027202
We offer a vacuum control valve with the number 351202A900. According to the listing data it fits Hyundai Kia. The part is used, working and in good condition. Shipping or personal collection is available. The offer includes a 6-month warranty.
Markings to compare
- 35120-2A900 / 351202A900 – manufacturer number
- 70027202 – OEM number
What it does
A vacuum control valve is a solenoid valve controlled by the engine control unit. It meters vacuum to actuators such as the turbo actuator, the EGR valve or the intake manifold flaps.
Vehicle fitment
- make and model: Hyundai Kia
One car model may have used different versions of this part, so the number matters most.
Possible fault symptoms
It is worth checking the part when:
- the control unit stores a solenoid circuit or boost control fault,
- you hear hissing around the valve or vacuum lines,
- the turbo or EGR actuator does not respond.
Fitting – what to watch out for
After fitting, clear the faults in the control unit and check the valve with a diagnostic tester. Connect the hoses to the same ports as on the old valve, ideally marking them before removal.
Frequently asked questions
| What condition is the part in? |
|---|
| The part is used, working and in good condition. The photos in the listing show the actual item. |
| Does a vacuum control valve fit only one engine? |
| The same solenoid valve is often used in several engines and makes. The number on the housing decides, so compare it before buying. |
| How can I receive my order? |
| Shipping or personal collection is available. |
Looking for another part? Browse the Vacuum control valves category or write to contact@auto24parts.com.