A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Vacuum control valve Mercedes-Benz 52793104
Vendors's code: 52793104
Product code: 6F0D-842BD
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How can you check whether the vacuum control valve 52793104 will fit?
Vacuum control valve, number 52793104, application: Mercedes-Benz. The part is used, working and in good condition. The safest way to match it is by the number on the label or housing.
Vacuum control valve Mercedes-Benz 52793104
The vacuum control valve 52793104 is a part used in Mercedes-Benz. The part is used, working and in good condition. Shipping or personal collection is available. The offer includes a 6-month warranty.
Identification data
- 52793104 – manufacturer number
Vehicle fitment
- make and model: Mercedes-Benz
The vehicle list comes from the listing data, and the part number is what finally decides the fit.
Its role in the engine
The solenoid valve connects the vacuum line to a pneumatic actuator. The control unit regulates its opening with an electrical signal, so the part affects boost and the emission control systems.
When a replacement may be needed
It is worth checking the part when:
- the engine loses power or goes into limp mode,
- you hear hissing around the valve or vacuum lines,
- the turbo or EGR actuator does not respond.
Before fitting
Connect the hoses to the same ports as on the old valve, ideally marking them before removal. After fitting, clear the faults in the control unit and check the valve with a diagnostic tester.
Before you order – FAQ
| Can I ask about the fit before ordering? |
|---|
| Yes. Send us the number of your part and your car details (VIN, engine code, year) and we will check the fit. |
| What condition is the part in? |
| The part is used, working and in good condition. The photos in the listing show the actual item. |
| How can I receive my order? |
| Shipping or personal collection is available. |
Send questions about this part to contact@auto24parts.com with the part number and your car details.