A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Vacuum control valve Volkswagen 72190375
Vendors's code: 72190375
Product code: C120-817D8
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does the vacuum control valve 72190375 fit your car?
Vacuum control valve, number 72190375, application: Volkswagen 1.9 TDI. The part is used, working and in good condition. The safest way to match it is by the number on the label or housing.
Vacuum control valve Volkswagen 72190375
This page describes one specific item: a vacuum control valve, number 72190375, for Volkswagen 1.9 TDI. The part is used, working and in good condition. Shipping or personal collection is available. The offer includes a 6-month warranty.
Part numbers
- 72190375 – manufacturer number
Vehicle fitment
- make and model: Volkswagen
- engine: 1.9 TDI
The vehicle list comes from the listing data, and the part number is what finally decides the fit.
Its role in the engine
It is a small but important part of engine management. When the valve stops working, the actuator connected to it does not get the right vacuum.
When to check this part
These symptoms may point to a fault:
- the control unit stores a solenoid circuit or boost control fault,
- you hear hissing around the valve or vacuum lines,
- the turbo or EGR actuator does not respond.
Replacement tips
Connect the hoses to the same ports as on the old valve, ideally marking them before removal. Before ordering, compare the number on the valve housing and the layout of the ports and connector.
Frequently asked questions
| How can I check if the part fits my car? |
|---|
| Compare the number 72190375 with the number on your part, then check the model and engine of your car. |
| What warranty does the part have? |
| We give a 6-month warranty on this part. |
| How can I receive my order? |
| Shipping or personal collection is available. |
Looking for another part? Browse the Vacuum control valves category or write to contact@auto24parts.com.