Vendors's code:
Product code: 63CF-91871
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
The ECU engine controller 0281017666 and 03L906012F is a reliable and well-matched part that ensures proper and stable engine operation in the Volkswagen Crafter.
The Ecu engine controller with part numbers 0281017666 and 03L906012F is responsible for managing the operation of the engine in the Volkswagen Crafter. It controls fuel injection, sensor responses and combustion parameters, ensuring stable engine performance even under heavy loads typical for commercial vehicles.
This Ecu engine controller was installed in selected Volkswagen Crafter versions with diesel engines. Exact compatibility depends on the production year and engine configuration, therefore it is recommended to compare the ECU number or verify compatibility using the VIN.
The safest method is to compare the part numbers on the ECU housing. If 0281017666 or 03L906012F is present, the Ecu engine controller is compatible. You can also send us a photo for verification.
It is best to use the full number, for example 0281017666. It is also recommended to search for 03L906012F, as different shops and catalogs may use different number formats.
Yes — after installation, the Ecu engine controller usually requires programming, adaptation or cloning to work correctly with the immobilizer and the vehicle’s electronic systems. This is a standard procedure when replacing an ECU in Volkswagen commercial vehicles.
In our store we offer two variants of the Ecu engine controller: a locked version and a unlocked version. Before choosing, we recommend carefully reading the variant descriptions to select the best option for your Crafter.
If the Ecu engine controller 0281017666 / 03L906012F is in stock, shipping is usually completed within 24–48 hours.
In this case, please contact us and provide the part number and vehicle model. We will help you choose the correct Ecu engine controller or suggest a compatible alternative.
Sterownik silnika o numerach 0281017666 oraz 03L906012F odpowiada za zarządzanie pracą jednostki napędowej w Volkswagenie Crafterze. Nadzoruje proces wtrysku paliwa, reakcje czujników i parametry spalania, dzięki czemu silnik pracuje stabilnie nawet przy dużych obciążeniach typowych dla aut dostawczych.
Ten sterownik silnika montowany był w wybranych wersjach Volkswagen Crafter z jednostkami wysokoprężnymi. Dokładne zastosowanie zależy od roku produkcji oraz konfiguracji silnika, dlatego przed zakupem warto porównać numer ECU lub skontaktować się z nami w celu weryfikacji po VIN.
Najpewniejszym sposobem jest porównanie oznaczeń na obudowie aktualnego sterownika. Jeżeli widnieje tam numer 0281017666 lub 03L906012F, oznacza to zgodność. W razie wątpliwości możesz przesłać zdjęcie swojego sterownika silnika — pomożemy potwierdzić dopasowanie.
Najlepiej użyć pełnego numeru, np. 0281017666. Dobrą praktyką jest także sprawdzenie drugiego oznaczenia, czyli 03L906012F, ponieważ różne sklepy i katalogi stosują różne formaty zapisu tych samych numerów.
Tak — po montażu sterownik silnika zazwyczaj wymaga programowania, adaptacji lub klonowania, aby poprawnie współpracował z immobilizerem oraz pozostałą elektroniką pojazdu. Jest to standardowa procedura przy wymianie ECU w samochodach użytkowych Volkswagen.
W naszym sklepie oferujemy dwa warianty sterownika silnika: wersję zablokowaną oraz wersję wylogowaną. Przed wyborem odpowiedniej opcji zalecamy dokładne zapoznanie się z opisem wariantów, aby dobrać sterownik silnika najlepiej dopasowany do swojego Craftera i planowanego sposobu montażu.
Jeśli sterownik silnika 0281017666 / 03L906012F jest dostępny na magazynie, wysyłka realizowana jest zazwyczaj w ciągu 24–48 godzin. Aktualne informacje o czasie realizacji zawsze znajdują się w opisie produktu.
W takiej sytuacji skontaktuj się z nami, podając numer części oraz model pojazdu. Pomożemy dobrać właściwy sterownik silnika lub zaproponujemy inne kompatybilne rozwiązanie.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
