A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller VOLKSWAGEN 0281013169 03G906021CE EDC16U34
Vendors's code:
Product code: FF40-913DB
Barcode:
Code 39:
ISBN:
325,20 zł
Price
325,20 zł
400,00 zł
Price
400,00 zł
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller VOLKSWAGEN 0281013169 03G906021CE EDC16U34
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
120,00 zł
-
shipping
(Poland)
from
120,00 zł
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
VOLKSWAGEN ECU ENGINE CONTROLLER 0281013169 03G906021CE EDC16U34
The Ecu engine controller 0281013169, 03G906021CE and EDC16U34 is a tested and compatible component that ensures stable and proper operation of the power unit in Volkswagen vehicles.
What is the role of the Ecu engine controller 0281013169 in Volkswagen vehicles?
The Ecu engine controller identified by part numbers 0281013169 and 03G906021CE, operating in the EDC16U34 system, is responsible for managing the diesel engine operation. It controls fuel injection, dosing and pressure, which directly affects performance, fuel consumption and engine stability.
Which vehicles use this Ecu engine controller?
This Ecu engine controller was installed in selected Volkswagen models with diesel engines. Exact compatibility depends on engine capacity, model year and equipment version, so ECU number or VIN verification is recommended before purchase.
How can I confirm that the Ecu engine controller 03G906021CE fits my car?
The best method is to compare the numbers on the currently installed controller housing. If you find 0281013169 or 03G906021CE, the Ecu engine controller is compatible with your vehicle. If unsure, please contact us before ordering.
Why does this Ecu engine controller have two part numbers?
The number 0281013169 comes from the electronics manufacturer, while 03G906021CE is the Volkswagen catalog reference. Both numbers refer to the same Ecu engine controller and differ only in notation.
How should I search for the EDC16U34 Ecu engine controller online?
The best results come from using the full reference number, for example 03G906021CE. It is also worth checking 0281013169, as listings may use different formats for the same part.
Does replacing the EDC16U34 Ecu engine controller require programming?
Yes — after installation, the Ecu engine controller usually requires adaptation, coding or cloning to work correctly with the immobilizer and other vehicle systems. This is a standard ECU replacement procedure.
Which Ecu engine controller variants are available in our store?
We offer two Ecu engine controller variants: a locked version and a virgin (logged-out) version. Please review the variant descriptions to choose the correct option for your Volkswagen.
What is the order processing time for the Ecu engine controller?
If the Ecu engine controller 0281013169 / 03G906021CE is in stock, shipping is usually completed within 24–48 hours. Current delivery details are always listed in the product description.
What should I do if the ordered Ecu engine controller is not suitable?
In this case, please contact us with the part number and vehicle details. We will help you select the correct Ecu engine controller or suggest a compatible alternative.
