Vendors's code:
Product code: 2775-37703
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
The ECU engine controller 0281017903, 03L907309AC and EDC17C54 is a proven and compatible part that ensures proper operation of the engine in Volkswagen vehicles.
Sterownik silnika oznaczony numerami <strona
The Ecu engine controller with numbers 0281017903, 03L907309AC and the system designation EDC17C54 is an ECU module used in Volkswagen vehicles equipped with TDI diesel engines. It manages fuel injection, sensor operation, combustion processes and all parameters that influence performance, fuel consumption and engine smoothness.
This controller is used in selected Volkswagen models with 1.6 TDI or 2.0 TDI engines, depending on configuration and production year. The most reliable way to confirm compatibility is by comparing ECU numbers or sending us your VIN.
The key factor is full number compatibility. If your current controller has the number 0281017903 or 03L907309AC and operates in the EDC17C54 system, this unit will fit. You can also send us a photo — we will confirm compatibility.
Enter the exact number, e.g. 03L907309AC or 0281017903. Trying different formatting variants may also help, as stores may use various numbering formats.
Yes — controllers from the EDC17 family require adaptation, cloning or programming to work properly with the vehicle’s immobilizer and electronic systems. This is a standard procedure when replacing an ECU in Volkswagen group vehicles.
If the product is in stock, shipping usually takes place within 24–48 hours. Current processing times are always shown in the product description.
Controllers with numbers 0281017903 / 03L907309AC / EDC17C54 are covered by the seller's warranty. In case of any issues, simply file a claim and provide the part number.
Contact us — provide the part number and your vehicle model. We will help you choose the correct controller or suggest a compatible replacement.
g>0281017903, 03L907309AC oraz oznaczeniem systemowym EDC17C54 to moduł ECU stosowany w samochodach Volkswagen wyposażonych w silniki wysokoprężne TDI. Zarządza on wtryskiem paliwa, pracą czujników, procesem spalania oraz innymi parametrami wpływającymi na osiągi, spalanie i kulturę pracy silnika.
Sterownik ten stosowany jest w wybranych modelach Volkswagen z silnikami 1.6 TDI lub 2.0 TDI w zależności od konfiguracji oraz rocznika. Najpewniejszą metodą potwierdzenia kompatybilności jest porównanie numeru ECU lub podanie nam numeru VIN.
Najważniejsza jest pełna zgodność oznaczeń. Jeśli Twój obecny sterownik ma numer 0281017903 lub 03L907309AC oraz pracuje w systemie EDC17C54, to ta część będzie pasować. Możesz także wysłać nam zdjęcie ECU — potwierdzimy dopasowanie.
Najlepiej wpisać dokładny numer, np. 03L907309AC lub 0281017903. Warto spróbować również wariantów zapisów bez spacji lub z różną interpunkcją, ponieważ sklepy stosują różne formaty numeracji.
Tak — sterowniki z rodziny EDC17 wymagają adaptacji, klonowania lub programowania, aby poprawnie współpracowały z immobilizerem oraz elektroniką pojazdu. Jest to standardowy etap przy wymianie ECU w autach grupy Volkswagen.
Wysyłka odbywa się zazwyczaj w ciągu 24–48 godzin, jeśli produkt jest dostępny w magazynie. Aktualny czas realizacji znajduje się zawsze w opisie oferty.
Sterowniki oznaczone numerami 0281017903 / 03L907309AC / EDC17C54 objęte są gwarancją sprzedawcy. W razie jakichkolwiek problemów wystarczy zgłosić reklamację wraz z numerem części.
Skontaktuj się z nami — podaj numer części oraz model auta. Pomożemy dobrać odpowiedni sterownik lub zaproponujemy kompatybilny zamiennik.
Cookies and related technologies enable the website to function properly and help us tailor the offer to your needs. You can accept our use of all these files and go to the store or adjust the use of files to your preferences by selecting the "Customize consents" option.
Here you can specify your preferences regarding our use of cookies.
These files are necessary for the operation of our website, so you cannot disable them.
These files enable you to use other functions of the website (other than those necessary for its operation). Enabling them will give you access to the full functionality of the website.
These files allow us to analyze our online store, which may contribute to its better functioning and adaptation to the needs of Users.
Thanks to these files, we can conduct marketing activities.
