The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ECU Engine Controller VOLVO 440 460 1.8 SIEMENS S111705113 C S111705113C 473477/01 47347701
Vendors's code:
Product code: F6B5-7278B
Barcode:
Code 39:
ISBN:
€101.63
Price
€101.63
€125.00
Price
€125.00
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller VOLVO 440 460 1.8 SIEMENS S111705113 C S111705113C 473477/01 47347701
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
VOLVO 440 460 1.8 ECU ENGINE CONTROLLER SIEMENS S111705113C 47347701
The Ecu engine controller S111705113 C, S111705113C, 473477/01 and 47347701 is a proven Siemens component designed for Volvo 440 and 460 1.8, ensuring stable and proper engine operation.
What is the function of the Ecu engine controller S111705113C in Volvo 440 and 460 1.8?
The Siemens Ecu engine controller identified by part numbers S111705113C and 47347701 is responsible for basic engine management in the 1.8 engines used in Volvo 440 and Volvo 460 models. It controls ignition, fuel dosing and sensor signals, ensuring smooth engine operation and stable driving.
Which Volvo versions use this Ecu engine controller?
This Ecu engine controller was installed in selected Volvo 440 and Volvo 460 models with the 1.8 engine. Exact compatibility depends on model year and vehicle configuration, so ECU number or VIN verification is recommended before purchase.
How can I check if the Ecu engine controller 47347701 fits my car?
The safest way is to check the markings on the installed unit. If the number S111705113C, 473477/01 or 47347701 is present, the Ecu engine controller is compatible with your vehicle. If unsure, please contact us before ordering.
Why does this Volvo Ecu engine controller have multiple part numbers?
The reference S111705113C comes from Siemens, while 47347701 is Volvo’s catalog number. Different formats refer to the same Ecu engine controller and result from different numbering systems.
How should I search for an Ecu engine controller for Volvo 440 or 460?
The best results come from searching by a full reference number, such as S111705113C or 47347701. Checking both numbers is recommended, as listings may use either format.
Are additional procedures required after replacing the Ecu engine controller?
In many cases, this type of Ecu engine controller works immediately after installation if the numbers match. Depending on vehicle configuration, basic adaptation may be required for correct cooperation with the car’s systems.
Which Ecu engine controller versions are available in our store?
We offer two Ecu engine controller variants: a locked version and a virgin (logged-out) version. Please review the variant descriptions before choosing the right option.
What is the order processing time?
If the Ecu engine controller S111705113C / 47347701 is in stock, shipping is usually completed within 24–48 hours. Current processing times are listed in the product description.
What should I do if the ordered Ecu engine controller is not suitable?
In this case, please contact us with the part number and vehicle details. We will help you select the correct Ecu engine controller or suggest a compatible alternative.
