Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine Controller SUZUKI VITARA 33920-56B30 3392056B30 E2T41271
Vendors's code:
Product code: DD31-66411
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
without VAT
Regular price:
€284.55
-0%
€350.00
Price
€350.00
Regular price:
€350.00
-0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine Controller SUZUKI VITARA 33920-56B30 3392056B30 E2T41271
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What is the Ecu engine controller 33920-56B30 used for in the Suzuki Vitara?
The Ecu engine controller 33920-56B30 is responsible for the correct operation of the engine in the Suzuki Vitara. It controls basic processes, such as engine start-up, stable operation and throttle response during everyday driving.
What role does the Ecu engine controller 3392056B30 play?
The Ecu engine controller 3392056B30 is an electronic module that collects data from sensors and manages engine operation based on this information. Thanks to it, the vehicle runs smoothly and predictably in all conditions.
Does the E2T41271 number refer to the same Ecu engine controller?
Yes, the E2T41271 number is the manufacturer’s designation, which corresponds to the Ecu engine controller 33920-56B30 and 3392056B30. All these numbers refer to the same part.
In which versions of the Suzuki Vitara is the Ecu engine controller 33920-56B30 used?
The Ecu engine controller 33920-56B30 was installed in selected versions of the Suzuki Vitara. Application depends on the model year and engine version, therefore checking the vehicle VIN number before purchase is recommended.
What symptoms can a faulty Ecu engine controller 3392056B30 cause?
A damaged Ecu engine controller 3392056B30 may cause starting problems, uneven engine operation, the check engine light to come on or sudden power loss.
Does the Ecu engine controller E2T41271 require programming?
In many cases, the Ecu engine controller E2T41271 requires matching to the vehicle immobiliser. The shop offers two variants: the Ecu engine controller in a locked version and a unlocked version. Before choosing, it is worth reading the variant descriptions.
Does the Ecu engine controller 33920-56B30 fit without modifications?
If the number 33920-56B30 or 3392056B30 matches the original controller in the vehicle, installation is carried out without mechanical modifications. The most important thing is choosing the correct controller variant.
Why is it worth selecting the Ecu engine controller by the E2T41271 number?
Selecting the Ecu engine controller by the E2T41271 number guarantees compatibility with the electrical system and proper cooperation with the Suzuki Vitara engine.
What is the difference between a locked and unlocked Ecu engine controller 3392056B30?
The locked version of the Ecu engine controller 3392056B30 requires immobiliser programming, while the unlocked version is prepared for easier installation. Detailed information is available in the variant description in the shop.
Is 33920-56B30 an original Suzuki Ecu engine controller?
Yes, the 33920-56B30 number is the original designation of the Ecu engine controller used in the Suzuki Vitara, which ensures stable and trouble-free operation of the power unit.
