A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS control unit Audi A8 0265103029 441907379
Vendors's code: 0265103029
Product code: 4A7B-30437
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does this ABS control unit fit the Audi A8?
This is a used, working ABS control unit for the Audi A8 - numbers 0 265 103 029 / 0265103029; 441 907 379 / 441907379. Before buying, compare the numbers with the label on the unit in your car.
ABS control unit Audi A8
The ABS control unit detects wheel lock-up and regulates pressure in the brake system. The unit on offer is for: Audi A8; it is used, working and in good condition.
Numbers to compare
- 0 265 103 029 / 0265103029 - manufacturer number (Bosch)
- 441 907 379 / 441907379 - VAG group number (OEM)
Application according to the listing
- Audi A8 - model
- Bosch - manufacturer
What the control unit does
In versions with ESP or ASR, the same module also works with traction and stability control. The range of functions depends on the car's equipment and the unit number.
Fitment
Compare the number 0 265 103 029 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- the ABS and brake lights stay on after switching on the ignition,
- no wheel speed reading,
- the car reports sensor faults even though the sensors are fine,
- the unit overheats or resets.
Before buying a unit, check the fuse, power supply, earth and wheel speed sensors - a damaged harness or sensor causes similar symptoms.
Questions and answers
| What condition is this part in? |
|---|
| It is a used part, working and in good condition, covered by a 6-month warranty. |
| Do you also sell connectors or ABS sensors? |
| This listing is for the control unit only. You will find other parts in the other shop categories, or ask us about availability. |
| Why does the number have several spellings? |
| The same number may be written on the label with spaces, dashes or as one string. We give both forms to make it easier to find. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.