A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS ESP BAS PML control unit Mercedes S 0265109478 0295453932Q01
Vendors's code: 0265109478
Product code: 3017-36330
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How do you check whether the unit will fit the Mercedes S?
This is a used, working ABS ESP BAS PML control unit for the Mercedes S - numbers 0 265 109 478 / 0265109478; 029 545 39 32 Q01 / 0295453932Q01. Before buying, compare the numbers with the label on the unit in your car.
ABS ESP BAS PML control unit Mercedes S
For the Mercedes S we offer a used unit that manages the ABS; match it by the numbers in the list. It is working and in good condition.
Numbers to compare
- 0 265 109 478 / 0265109478 - manufacturer number (Bosch)
- 029 545 39 32 Q01 / 0295453932Q01 - additional part number
- 0295453932 - Mercedes-Benz number (OEM)
Application according to the listing
- Mercedes S - model
- Bosch - manufacturer
What the control unit does
The unit is part of a safety system, so compare the numbers carefully before buying. A mismatched version may not work with the sensors or hydraulic unit.
Fitment
Compare the number 0 265 109 478 in full with the number on your unit. Different versions were fitted to the same models, so the number decides, not the model alone.
Signs of a faulty control unit
- the wheels lock under hard braking,
- sometimes the ESP or ASR light comes on as well,
- the ABS light is on right after starting the engine,
- the brakes work, but without ABS assistance.
Before buying, make sure the cause is not the power supply or harness, and only then replace the unit.
Questions and answers
| Which number matters most for fitment? |
|---|
| It is best to compare all the numbers on the label, above all the one marked as the manufacturer or OEM number. |
| Does the control unit need coding after replacement? |
| It depends on the make, model and version. Before buying, check whether your car needs adaptation or coding after replacement. |
| Is the hydraulic unit (ABS pump) included? |
| This listing is for the control unit described in the title. If you also need the pump, write to us before buying and we will confirm exactly what is included. |
Send fitment questions to contact@auto24parts.com - give the model, year and the number on the unit.