The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ABS pump and control module Audi Bosch 4E0614517CP 4E0910517J 0265950188
Vendors's code:
Product code: 3CA5-7123E
Barcode:
Code 39:
ISBN:
€487.80
Price
€487.80
€600.00
Price
€600.00
Ask about the product
ABS pump and control module Audi Bosch 4E0614517CP 4E0910517J 0265950188
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ABS pump 4E0614517CP fit your Audi?
It does if your unit has VAG number 4E0 614 517 CP and its control module is 4E0 910 517 J (Bosch 0 265 950 188). We are selling a genuine Bosch assembly in used, working condition, intended for Audi.
ABS unit 4E0614517CP with Bosch module 4E0910517J
With this assembly the full number is especially important, because the shop also has other versions of 4E0 614 517 that differ in the final letters. A different suffix may indicate a different version of the system, so matching the first characters alone is not enough. Compare the whole reference 4E0614517CP together with module number 4E0 910 517 J – only a complete set of matching markings makes the choice certain.
Pump and control module markings
- 4E0614517CP – VAG number of the ABS pump (hydraulic unit), written as 4E0 614 517 CP
- 4E0910517J – VAG number of the ABS/ESP control module, on the control module label: 4E0 910 517 J
- 0265950188 – Bosch number of the control module, on the control module label: 0 265 950 188
On this unit, the markings stamped in the hydraulic block cannot be read in the photos, so the most reliable reference point is the label on the control module housing with numbers 4E0 910 517 J and 0 265 950 188. Compare them with the markings on your part, and then make sure that pump number 4E0614517CP matches as well – it appears on the same label.
When the ABS assembly starts to fail
A faulty unit or module is usually indicated by:
- ABS and ESP warning lights on at the same time,
- ABS not working during braking,
- a pump fault read with a diagnostic tool.
Before replacing it, check the fault memory, the wheel speed sensors, fuses, wiring, plug and battery – a cheaper cause often brings up exactly the same warning light. After fitting, bleed the brakes, and if the car has ESP, expect the basic setting of the steering angle sensor and the ESP sensors as well.
4E0614517CP – answers to your questions
| Which car is this pump for? |
|---|
| For Audi; the model is not confirmed. Compatibility is determined by the numbers of the pump and control module 4E0 910 517 J. |
| What is the condition and warranty of the assembly? |
| The part is genuine, used and in working order. The warranty period is given in the product features table. |
| Does module 4E0 910 517 J need coding? |
| On many VW Group vehicles the ABS/ESP control module is coded with a diagnostic tool after replacement – check this for your car before fitting. |
| Does the system need bleeding after the replacement? |
| Yes, bleeding the brake system is a mandatory step after fitting an ABS assembly. |
Send us photos of the control module label or your VIN, and we will confirm the fit before you order.
