A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Ford ATE JY162B373AB JY162C219AB
Vendors's code: JY16-2C219-AB
Product code: C38D-98533
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
€350.00
Price
€350.00
Ask about the product
ABS pump Ford ATE JY162B373AB JY162C219AB
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How to check whether ABS pump JY162B373AB fits your Ford
Used original ABS module with number JY162B373AB for Ford. Confirm compatibility with the number from your original pump.
How to identify ABS pump JY162B373AB for your Ford
This is a used original ABS pump with a control unit for Ford cars: an aluminium hydraulic block with valves and a pump motor, with the electronics bolted to it. The main number is JY162B373AB, and the other numbers from the labels are listed below. The listing does not state the car model or year, so we do not give them here and match the part by its numbers.
Numbers to compare
Below are the numbers as they appear on the labels, together with the single-string form used in catalogues:
- JY16-2B373-AB (catalogue format: JY162B373AB), original Ford number,
- JY16-2C219-AB (catalogue format: JY162C219AB), original Ford number.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
What can point to an ABS pump failure
- the brake pedal pulses or feels uneven for no obvious reason,
- valve or pump motor faults are stored in the control unit memory,
- the pump motor switches on at unusual moments or runs louder than usual,
- the ABS warning light comes on together with the stability control warning light.
It is worth reading the fault codes and checking the sensor wiring before replacement. Fitting and bleeding the brake system are usually carried out by a garage with the right equipment.
Questions and answers
| Where do I find number JY162B373AB on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Which car model does this pump fit? |
| The listing does not state a model or year, so confirm compatibility with the number from the original pump in your car, or send us a photo of it. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| Is this a new part? |
| No. We sell used original modules, each one inspected before sale. You will find the warranty period in the product features table. |
Not certain this is the right module? Send us the numbers from the label on your pump and we will help you compare them.
