A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Opel Vectra C Signum 13172568 13664108
Vendors's code: 13172568
Product code: 54084728B
Barcode:
Code 39:
ISBN:
Ask about the product
ABS pump and control module Opel Vectra C Signum 13172568 13664108
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.86
-
shipping
(Poland)
from
£22.86
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ABS pump for the Opel Vectra C Signum - what to check before buying?
This is a used, working ABS pump with control module for the Opel Vectra C Signum - numbers 13172568; 13664108. Before buying, compare the numbers with the label on the module in your car.
ABS pump and control module Opel Vectra C Signum
This ABS pump with control module is intended for: Opel Vectra C Signum. It is a used, working part in good technical condition.
Numbers to compare
- 13172568 - part number (OEM)
- 13664108 - part number (OEM)
- 65054284 - part number (OEM)
- 13509008U - part number (OEM)
- 54084728B - part number (OEM)
Application according to the listing
- Opel Vectra C Signum - model
How an ABS pump with control module works
ABS does not shorten the braking distance in all conditions, but it lets you steer the car under hard braking. The pump with control module is the heart of this mechanism.
Matching
We also offer other pumps for this model with different numbers. Choose by the number on the module, not by the model alone. The fit is decided first of all by the part number, and only then by the model and year, because different modules were used within one model.
Symptoms of a faulty ABS pump
- an ABS fault appears after replacing the battery,
- the voltage at the module is unstable,
- the brake and ABS warning lights come on together,
- the brakes work, but without ABS assistance.
Remember that after replacement the module may need coding or adaptation - check this for your model.
Questions and answers
| What does “used, working” mean? |
|---|
| We sell it as a used part, in working order and in good condition; this information is also given in the listing features. |
| Do the brakes need bleeding after replacement? |
| Yes, once the brake system has been opened it must be bled. In many cars this is done with a diagnostic tool that activates the ABS valves. |
| Which number matters most when choosing? |
| It is best to compare all the numbers on the module, above all the one marked as the manufacturer or OEM number. |
If you have questions about the application, write to contact@auto24parts.com and give the number from the label.
