ABS Pump VOLKSWAGEN AUDI SEAT SKODA 1K0 614 117 H, 1K0614117H, ATE 10.0207-0107.4, 10020701074, 1K0 907 379 P, 1K0907379P, ATE 10.0970-0315.3, 10097003153

Is the ATE ABS pump and control module 1K0614117H and 1K0907379P compatible with Volkswagen, Audi, Seat and Skoda vehicles?

The ATE ABS pump and control module with numbers 1K0 614 117 H, 1K0614117H and 1K0 907 379 P were installed in many Volkswagen, Audi, Seat and Skoda models. These modules are responsible for the proper operation of ABS and ESP systems, therefore before purchasing it is important to carefully verify all markings located on the old part.

Why are the numbers 1K0614117H and 1K0907379P important when choosing an ABS pump?

The numbers 1K0614117H and 1K0907379P help match the correct ABS pump and control module to a specific vehicle version. Even visually similar modules may differ in electronics, configuration or supported safety systems. Matching the numbers helps avoid installation problems.

What symptoms may indicate a failure of the ATE ABS pump 10020701074 and control module 10097003153?

The ABS or ESP warning light most commonly appears on the dashboard. Drivers may also notice brake system errors during diagnostics or problems with the operation of driving safety assistance systems. In many cases, such symptoms are caused by a damaged ATE ABS pump 10020701074 or the control module 10097003153.

Are the ABS pump 1K0 614 117 H and control module 1K0 907 379 P original ATE parts?

The numbers 10.0207-0107.4 and 10.0970-0315.3 identify components manufactured by ATE, a company that supplied braking systems for many Volkswagen Audi Group vehicles. The ABS pump and control module were used as factory-installed equipment in selected Volkswagen, Audi, Seat and Skoda models.

What should you pay attention to before buying the ABS pump 1K0614117H?

Before purchasing, it is best to check the complete set of markings located on the old ABS pump and control module. The number 1K0614117H should match the part previously installed in the vehicle. It is also recommended to compare the control module number 1K0907379P to ensure full module compatibility.

Does replacing the ABS pump 1K0 614 117 H and control module 1K0 907 379 P require coding?

In many vehicles, after replacing the ABS pump 1K0 614 117 H and the control module 1K0 907 379 P, coding or module adaptation may be required. The scope of the necessary procedures depends on the vehicle model and equipment version. For this reason, installation is best performed using professional diagnostic equipment.

How can I check whether the ATE ABS pump 10.0207-0107.4 is compatible with my vehicle?

The safest solution is to compare all numbers with the part previously installed in the vehicle or verify compatibility using the VIN number. The ATE ABS pump 10.0207-0107.4 and the control module 10.0970-0315.3 were used in different Volkswagen, Audi, Seat and Skoda models, therefore careful verification of all numbers before purchase is very important.