A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump and control module Audi ATE 8V0614517E 10022012164 10091643993
Vendors's code: 8V0614517E
Product code: 10091643993
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
8V0614517E - is this the number on your ABS pump?
If so, this genuine, used and working ATE assembly with a control module may be the right part for your Audi. Compare VAG number 8V0 614 517 E with ATE number 10.0220-1216.4.
ATE ABS unit 8V0614517E with control module 10.0916-4399.3
A complete ABS assembly makes sense when diagnostics have shown that the hydraulic unit itself or its electronics are at fault, and not the sensors and wiring. This listing covers hydraulic unit 8V0 614 517 E with ATE block 10.0220-1216.4 and a control module with ATE number 10.0916-4399.3. Among the markings on the labels are ‘Controller’, ‘MK100ESC’ and ‘Steuergeraet ESC’.
Summary of VAG and ATE numbers
- 8V0614517E - VAG number of the ABS pump (hydraulic unit), entry: 8V0 614 517 E
- 10022012164 - ATE number of the hydraulic block (pump), on the sticker on the pump motor: 10.0220-1216.4
- 10091643993 - ATE number from the control module label, entry: 10.0916-4399.3 (partly illegible in the photo, and the full number comes from the product data)
You can read the block number from the paper-and-foil sticker with a DataMatrix code on the pump motor; the control module data is on the label of its housing. Three other versions of this pump in our shop have a different part number, so when comparing, pay attention to the letter E.
When it is worth suspecting this assembly
A failure of the pump or the control module is most often indicated by:
- no communication with the ABS control module,
- an ABS warning light that stays on,
- a stored pump motor fault.
First read out the faults and check the wheel speed sensors, fuses, wiring harness, plug and battery voltage. After replacement, bleed the brakes, and on many VW Group cars code the control module and, with ESP, calibrate the sensors.
Buyers' questions - pump 8V0614517E
| Which make does this assembly fit? |
|---|
| We offer it for Audi. You can confirm the fit with your car by comparing the numbers. |
| What condition is the part in? |
| It is a used, genuine and working ATE assembly. The warranty period is given in the product features table. |
| What do the ATE numbers of this assembly mean? |
| Number 10.0220-1216.4 relates to the hydraulic block, that is the pump, and 10.0916-4399.3 comes from the control module label. |
| Does a version with a different letter at the end of the number fit? |
| Do not assume so. A different ending, for example anything other than E, may mean a different version of the system - choose a number identical to yours. |
Want to be sure? Send us photos of the stickers or your VIN, and we will compare them with this item.