Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine controller OPEL CORSA 1.2 DELCO 16204689GD D95007 BPKM
Vendors's code: D95007
Product code: 16204689GD
Barcode:
Code 39:
ISBN:
£38.83
Price
£38.83
without VAT
Regular price:
£38.83
-0%
£47.76
Price
£47.76
Regular price:
£47.76
-0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine controller OPEL CORSA 1.2 DELCO 16204689GD D95007 BPKM
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.88
-
shipping
(Poland)
from
£23.88
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU Engine controller OPEL CORSA 1.2 DELCO 16204689GD D95007 BPKM
Which Opel Corsa model and engine version is the 16204689GD D95007 controller designed for?
The ECU Engine controller OPEL CORSA 1.2 DELCO 16204689GD is intended for the Corsa variant equipped with the 1.2 petrol engine managed by the Delco system. The Opel part number D95007 and identification code BPKM uniquely define the specific software version built into this control module.
Using a controller with the identical number 16204689GD and reference D95007 guarantees full compatibility with the wiring and immobilizer system of your Opel Corsa 1.2.
What engine functions does the BPKM 16204689GD ECU module manage?
The Opel Corsa 16204689GD engine computer controls fuel delivery, ignition timing, and processes signals from the temperature sensor, airflow sensor, and lambda probe. The D95007 module ensures the 1.2 engine runs smoothly and efficiently regardless of driving conditions.
The BPKM controller also handles communication with other electronic systems in the vehicle, including the OBD system and emissions control in the Opel Corsa.
How do you recognise that the 16204689GD BPKM controller in Opel Corsa 1.2 needs replacing?
Typical signs of a failing Delco D95007 module include rough idling, cold start difficulties, and unexpected engine cut-outs while driving. OBD diagnostic errors without any obvious mechanical fault are also frequently reported.
Every 16204689GD controller we offer undergoes full electrical testing before dispatch, so the customer receives a verified product with warranty and fast delivery.
Where can I find the 16204689GD and D95007 numbers on the Delco module?
The number 16204689GD appears on the label attached directly to the controller housing, while D95007 and BPKM are listed as additional identifiers for the technical specification required by Opel for the 1.2 engine.
Before ordering a replacement ECU for your Opel Corsa 1.2, always compare both codes with the markings on the original module fitted in your car to avoid software mismatches.
Does the OPEL CORSA 1.2 DELCO 16204689GD BPKM ECU require programming after replacement?
In most cases, the Delco ECU module 16204689GD D95007 may require basic immobilizer adaptation using a diagnostic tool after installation. The scope of work depends on the production year and equipment level of the specific Opel Corsa 1.2.
An exact match of the 16204689GD number with the original simplifies the entire procedure and reduces the time needed to start the car after replacing the BPKM ECU module.
