Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Toyota Prius 1.5 8954047090

  • Part Type ECU Engine controller
  • Vehicle Make and Model TOYOTA PRIUS
  • Engine Type 1.5
  • Year of Manufacture 2008
  • Manufacturer Part Number 89540-47090
  • Part Number 8954047090
  • Part Number 89540-47090
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
ORYGINAL
with VAT without VAT
Price €250.00
Availability:
product-availability-module In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
Click to check the logout options for this device
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model TOYOTA PRIUS
  • Engine Type 1.5
  • Year of Manufacture 2008
  • Manufacturer Part Number 89540-47090
  • Part Number 8954047090
  • Part Number 89540-47090
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Will engine control unit 8954047090 fit your Toyota?

Used Toyota engine control unit with number 8954047090. Send us the numbers from the label on your control unit.

Go to full description

Used engine control unit for Toyota Prius with number 8954047090

This is a used original engine control unit for Toyota Prius. It manages engine operation based on signals from sensors. The main number is 8954047090, and the other numbers from the listing are given below. The listing states that this control unit is for: Toyota Prius. Engine given in the listing: 1.5.

Control unit numbers and markings

The numbers from the listing, as written on the labels and as a single string:

  • 8954047090, car manufacturer's original number.

The full numbers matter, including their endings. If in doubt, send us a photo of your control unit.

Control unit variant

This listing is for a control unit in the following variant(s): Locked / Unlocked. We describe the differences between the variants (locked, unlocked, Virgin, IMMO OFF, Plug and Play, clone, full set) on the ECU preparation options page. Before buying, send us the numbers from the label and we will confirm which variant is available for that number.

What can point to an engine control unit failure

  • the car loses power or goes into limp mode,
  • control unit communication or power supply errors appear in the fault memory,
  • faults appear and disappear, usually once the engine has warmed up,
  • starting is blocked by the immobiliser after the electronics have been replaced or repaired.

Before replacing the control unit, check the condition of the connector and the power supply wires. After fitting, the fault codes usually need to be cleared and, if necessary, the control unit programmed for the car.

Questions and answers

Are the make and model of the car enough to choose the part?
No. A single model comes with different versions of the control unit, depending on the engine, the software version and the equipment. The most reliable reference is the number on the original control unit.
Does this control unit fit the 1.5 engine?
According to the listing it does, but confirm this with the numbers from the original control unit, because a single model comes with different versions.
What should I do if the ending of my number is different?
The ending of a number often indicates a different version of the control unit, so do not order the part without confirmation. Send us the number from the label on your control unit.
Is this a new part?
No. We sell used original control units, each one inspected before sale. You will find the warranty period in the product features table.

Not certain this is the right control unit? Send us the numbers from the label on your control unit and we will help you compare them.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more