Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine control unit Toyota Prius 1.5 8998147220

  • Part Type ECU Engine controller
  • Vehicle Make and Model TOYOTA PRIUS
  • Engine Type 1.5
  • Year of Manufacture 2004-2008
  • Manufacturer Part Number 89981-47220
  • Part Number 8998147220
  • Part Number 89981-47220
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
ORYGINAL
with VAT without VAT
Price €125.00
Availability:
product-availability-module In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
Click to check the logout options for this device
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ECU Engine controller
  • Vehicle Make and Model TOYOTA PRIUS
  • Engine Type 1.5
  • Year of Manufacture 2004-2008
  • Manufacturer Part Number 89981-47220
  • Part Number 8998147220
  • Part Number 89981-47220
  • Configuration Variants Locked / Unlocked
  • Warranty 6-month warranty
  • Condition USED ORIGINAL IN GOOD CONDITION
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

What does number 8998147220 on an engine control unit mean?

Used engine control unit with number 8998147220 for Toyota Prius. Confirm compatibility with the number from the original control unit.

Go to full description

How to check whether control unit 8998147220 will fit Toyota Prius?

This is a used original engine control unit for Toyota Prius. It manages engine operation based on signals from sensors. The main number is 8998147220, and the other numbers from the listing are given below. The listing states that this control unit is for: Toyota Prius. Engine given in the listing: 1.5.

Part numbers for 8998147220

The numbers as written in the listing and as a single string, the way catalogues list them:

  • 8998147220, car manufacturer's original number.

Compare the numbers with the original control unit in your car, and if any of them differs, write to us before buying.

Control unit variant

This listing is for a control unit in the following variant(s): Locked / Unlocked. We describe the differences between the variants (locked, unlocked, Virgin, IMMO OFF, Plug and Play, clone, full set) on the ECU preparation options page. Before buying, send us the numbers from the label and we will confirm which variant is available for that number.

Faults that call for checking the control unit

  • the engine idles unevenly or stalls for no obvious reason,
  • the car loses power or goes into limp mode,
  • the engine jerks when accelerating,
  • the engine no longer runs properly after the battery has gone flat.

Before buying a control unit, read the fault codes with a diagnostic tester and check the power supply, the earth connections and the connector. Damaged sensors, wiring or fuses can cause similar symptoms, and in that case replacing the control unit will not help.

Questions and answers

Will the control unit work after fitting without programming?
That depends on the variant of the control unit and on the car. Before buying, send us the numbers from the label and we will confirm what is needed.
What should I do if the ending of my number is different?
The ending of a number often indicates a different version of the control unit, so do not order the part without confirmation. Send us the number from the label on your control unit.
How should I prepare for fitting the control unit?
Disconnect the battery, check the connector and the wiring, and after fitting read and clear the fault codes with a tester. Configuration is best carried out in a garage with suitable equipment.
Is this a new part?
No. We sell used original control units, each one inspected before sale. You will find the warranty period in the product features table.

Not certain this is the right control unit? Send us the numbers from the label on your control unit and we will help you compare them.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more