A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Engine Control Unit Volkswagen, Audi A4 B6/B7 Bosch 8E0907401D 0281010823
Vendors's code: 0281010823
Product code: 0281010823
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ECU 8E0907401D fit your Audi A4 B6/B7?
It does if the label on your module shows number 8E0907401D and Bosch number 0281010823 (as printed on the sticker: 0 281 010 823). This is a used, working diesel engine ECU, available locked or unlocked.
Engine Control Unit Volkswagen, Audi A4 B6/B7 Bosch 8E0907401D 0281010823
ECU 8E0907401D comes from the Volkswagen Group and, according to our records, was used in the Audi A4 B6/B7 with a diesel engine. It was made by Bosch, as indicated by number 0281010823 – the 0 281 series covers diesel ECUs. The module handles fuel metering and injection timing and works with the engine sensors.
Numbers to compare
- 8E0907401D – Audi / Volkswagen part number
- 0281010823 – Bosch manufacturer number, shown on the label as 0 281 010 823
Compare the whole number, including the final letter. The D at the end of 8E0907401D identifies the software or hardware version, so an ECU with a different letter may not work properly with your A4.
Symptoms that may indicate a fault
- the starter motor turns but the diesel will not start despite a good fuel supply,
- no connection to the module in the diagnostic tester,
- a sudden switch to limp mode with reduced power,
- stored internal ECU faults after a voltage spike or moisture ingress.
Start by checking the earths, fuses and plug – a corroded pin produces similar symptoms to damaged electronics.
Versions to choose from
You can order this ECU locked or unlocked. The first option is a module with the data and immobiliser from the previous Audi – for a workshop that will carry out the unlocking, programming and matching itself. The second means we prepare it in-house, usually within 1–2 working days before dispatch.
The preparation method (PIN / CAR PASS, Virgin, IMMO OFF, auto programming or cloning) depends on the number, software and immobiliser, so not every method is available for this unit. Please ask before buying. Details: ECU preparation options.
Questions and answers
| Is 8E0907401D an Audi or a Volkswagen number? |
|---|
| It is a Volkswagen Group part number, also assigned to ECUs fitted to Audi models. Next to it on the label you will find Bosch number 0281010823. |
| Will the locked version start the engine after fitting? |
| No. It needs to be unlocked and matched to your vehicle's immobiliser, which is done by a workshop. |
| What condition is the module in? |
| Used, in working order and in good condition. You will find the warranty period in the product features table. |
Send the numbers from your ECU to contact@auto24parts.com – we will confirm compatibility with 8E0907401D before you order.