Skip to main content
English $
English $
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English $
English $
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine Control Unit Volkswagen, Audi A4 B6/B7 Bosch 8E0907401D 0281010823

  • Part Type Engine control unit (ECU)
  • Vehicle Make and Model Volkswagen, Audi A4 B6/B7
  • Manufacturer Bosch
  • Manufacturer Part Number 0 281 010 823 / 0281010823
  • OEM Part Number 8E0907401D
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Bosch
with VAT without VAT
Price $125.46
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from $30.11 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type Engine control unit (ECU)
  • Vehicle Make and Model Volkswagen, Audi A4 B6/B7
  • Manufacturer Bosch
  • Manufacturer Part Number 0 281 010 823 / 0281010823
  • OEM Part Number 8E0907401D
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Does ECU 8E0907401D fit your Audi A4 B6/B7?

It does if the label on your module shows number 8E0907401D and Bosch number 0281010823 (as printed on the sticker: 0 281 010 823). This is a used, working diesel engine ECU, available locked or unlocked.

Go to full description

Engine Control Unit Volkswagen, Audi A4 B6/B7 Bosch 8E0907401D 0281010823

ECU 8E0907401D comes from the Volkswagen Group and, according to our records, was used in the Audi A4 B6/B7 with a diesel engine. It was made by Bosch, as indicated by number 0281010823 – the 0 281 series covers diesel ECUs. The module handles fuel metering and injection timing and works with the engine sensors.

Numbers to compare

  • 8E0907401D – Audi / Volkswagen part number
  • 0281010823 – Bosch manufacturer number, shown on the label as 0 281 010 823

Compare the whole number, including the final letter. The D at the end of 8E0907401D identifies the software or hardware version, so an ECU with a different letter may not work properly with your A4.

Symptoms that may indicate a fault

  • the starter motor turns but the diesel will not start despite a good fuel supply,
  • no connection to the module in the diagnostic tester,
  • a sudden switch to limp mode with reduced power,
  • stored internal ECU faults after a voltage spike or moisture ingress.

Start by checking the earths, fuses and plug – a corroded pin produces similar symptoms to damaged electronics.

Versions to choose from

You can order this ECU locked or unlocked. The first option is a module with the data and immobiliser from the previous Audi – for a workshop that will carry out the unlocking, programming and matching itself. The second means we prepare it in-house, usually within 1–2 working days before dispatch.

The preparation method (PIN / CAR PASS, Virgin, IMMO OFF, auto programming or cloning) depends on the number, software and immobiliser, so not every method is available for this unit. Please ask before buying. Details: ECU preparation options.

Questions and answers

Is 8E0907401D an Audi or a Volkswagen number?
It is a Volkswagen Group part number, also assigned to ECUs fitted to Audi models. Next to it on the label you will find Bosch number 0281010823.
Will the locked version start the engine after fitting?
No. It needs to be unlocked and matched to your vehicle's immobiliser, which is done by a workshop.
What condition is the module in?
Used, in working order and in good condition. You will find the warranty period in the product features table.

Send the numbers from your ECU to contact@auto24parts.com – we will confirm compatibility with 8E0907401D before you order.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more