A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine Control Unit Volkswagen, Seat Ibiza 1.9 TDI Bosch EDC15P+ 038906019NJ 0281011823
Vendors's code: 0281011823
Product code: 0281011823
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
What does number 038906019NJ on the Seat Ibiza 1.9 TDI ECU mean?
It is the Volkswagen part number of a Bosch EDC15P+ engine ECU from a 2005–2006 Seat Ibiza 1.9 TDI. The second number, 0281011823 (0 281 011 823), was assigned by Bosch. The module is used and in working order.
Engine Control Unit Volkswagen, Seat Ibiza 1.9 TDI Bosch EDC15P+ 038906019NJ 0281011823
The 2005–2006 Seat Ibiza with the 1.9 TDI engine used a Bosch module from the EDC15P+ family. ECU 038906019NJ handles fuel metering and turbo boost, and also communicates with the vehicle's immobiliser. The same type of module was used in Volkswagen vehicles.
Numbers to compare
- 038906019NJ – VW / Seat part number
- 0281011823 – Bosch number, as printed on the label 0 281 011 823
- EDC15P+ – Bosch ECU family
The last four characters of the number – 19NJ – distinguish this module from many other 038906019 versions. The NJ suffix in particular denotes the software and hardware version, which is worth sticking to.
When to suspect the ECU in the Ibiza
- the engine turns over but will not start, while the pump and injectors are fine,
- the tester cannot establish a connection with the engine module,
- the Ibiza suddenly goes into limp mode,
- the fault appeared after a voltage spike or water ingress.
Start the diagnosis with the earth leads and connector – these are cheaper and more common causes.
Options available for this module
You have two options. We will prepare an unlocked ECU before dispatch, usually within 1–2 working days. A locked ECU contains the data and immobiliser of the previous Ibiza and goes to workshops that unlock, program and match it themselves.
Possible methods are PIN / CAR PASS, Virgin, IMMO OFF, auto programming or cloning, but their availability depends on the number, software and immobiliser. Before buying, ask what is possible for this unit. More on the ECU preparation options page.
Questions and answers
| Does the ECU fit an Ibiza from outside 2005–2006? |
|---|
| The year is a guide. Number 038906019NJ on the casing of your module is what decides. |
| What does EDC15P+ mean? |
| It is the designation of the Bosch Electronic Diesel Control ECU family. |
| What condition is the ECU in? |
| Used, in working order and in good condition. You will find the warranty period in the product features table. |
You can confirm the details of 038906019NJ by emailing contact@auto24parts.com.