Skip to main content
English zł
English zł
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English zł
English zł
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine Control Unit Volkswagen, Skoda Bosch 06A906018GH 0261206758

  • Part Type Engine control unit (ECU)
  • Vehicle Make and Model Volkswagen, Skoda
  • Manufacturer Bosch
  • Manufacturer Part Number 0 261 206 758 / 0261206758
  • OEM Part Number 06A906018GH
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Bosch
with VAT without VAT
Price 500,00 zł
Availability:
In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
Click to check the logout options for this device
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from 120,00 zł - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type Engine control unit (ECU)
  • Vehicle Make and Model Volkswagen, Skoda
  • Manufacturer Bosch
  • Manufacturer Part Number 0 261 206 758 / 0261206758
  • OEM Part Number 06A906018GH
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Looking for a Bosch 0261206758 ECU for a Volkswagen or Skoda?

This unit carries VW number 06A906018GH, and the Bosch label reads 0 261 206 758. It is used and in working order – check that both numbers match your ECU.

Go to full description

Engine Control Unit Volkswagen, Skoda Bosch 06A906018GH 0261206758

Bosch number 0 261 206 758 belongs to the petrol engine ECU series, while VW number 06A906018GH identifies the version used in Volkswagen and Skoda models. The unit processes sensor signals and uses them to control injection and ignition. When faulty, it can immobilise the vehicle or put it into limp mode.

Numbers on the label

  • 06A906018GH – VW part number
  • 0261206758 – Bosch number (0 261 206 758)

The GH suffix in the VW number matters – within 06A906018 there are many versions differing in software or hardware.

What to look out for when diagnosing

  • the starter turns but the engine won't fire,
  • no control of the fuel pump or injectors,
  • internal ECU faults stored in memory,
  • hunting idle speed with no mechanical cause.

Check the immobiliser too – a key that fails authorisation has a similar effect to a faulty unit.

Two options to choose from

If you have a workshop with your own programming equipment, choose the locked version: the ECU retains the data and immobiliser from the vehicle it came from, and you carry out the unlocking, programming and matching yourself. The unlocked version is prepared in-house before dispatch – this usually takes 1–2 working days.

Not every method can be used on every unit: PIN / CAR PASS, Virgin, IMMO OFF, auto programming or cloning. It depends on the part number, software version and type of immobiliser, so before buying, ask what is possible for the 06A906018GH. More on the page ECU preparation options.

Questions and answers

Will 06A906018GH replace a unit with a different suffix?
Probably not without verification. The letters at the end are different versions, so it is safer to choose an identical number or send us the numbers.
Will the 06A906018GH start the engine straight after fitting?
Not in the locked version – it needs to be programmed and matched to the immobiliser. With the unlocked version, it depends on the preparation method, which we agree before dispatch.
Is the unit in working order?
Yes, it is in working order and in good condition, although used. You will find the warranty period in the product features table.

If in doubt, email contact@auto24parts.com. We'll tell you whether this unit matches yours and which option to choose.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more