The automatic transmission control unit (often designated as TCU or TCM) is a crucial electronic component responsible for smooth and trouble-free gear shifting. Its failure, most often caused by overheating, short circuits, or water damage, results in jerking, an inability to shift gears, or the vehicle entering limp mode. Purchasing a new module at an authorized dealership is a massive expense, which is why replacing it with a fully functional, used original is the most reasonable solution.
ECU Engine Controller ALFA ROMEO 145 146 BOSCH 0261204944 00467766410 1037352979 037 C
Vendors's code:
Product code: A908-145C6
Barcode:
Code 39:
ISBN:
€101.63
Price
€101.63
€125.00
Price
€125.00
In stock
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller ALFA ROMEO 145 146 BOSCH 0261204944 00467766410 1037352979 037 C
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Engine control unit Alfa Romeo 145 146 Bosch 0261204944 00467766410 1037352979 037 C
The engine control unit for Alfa Romeo 145 and 146 Bosch with part numbers 0261204944, 00467766410, 1037352979 and 037 C is a proven solution for replacement or failure – before purchasing, please read the variant description, as the engine controller is available in a locked or unlocked version.
What is the Alfa Romeo 145 146 engine ECU BOSCH 0261204944?
The Ecu engine controller BOSCH 0261204944 used in the Alfa Romeo 145 and 146 is responsible for proper and stable engine operation. It affects driving smoothness, driving comfort and everyday vehicle use.
Which models does the engine ECU 00467766410 fit?
The Ecu engine controller with part number 00467766410 is intended for the Alfa Romeo 145 and Alfa Romeo 146 models. It is always essential to compare the part number with the one installed originally in the vehicle.
Does the Alfa Romeo 145 146 engine ECU 1037352979 require programming?
In many cases, the Ecu engine controller 1037352979 in the Alfa Romeo 145 and 146 requires adaptation to a specific vehicle. This ensures correct cooperation with the remaining vehicle systems.
What symptoms can a faulty 037 C ECU cause in the Alfa Romeo 146?
A damaged Ecu engine controller marked as 037 C in the Alfa Romeo 146 may cause engine starting problems, uneven operation or a loss of power. Warning lights often appear as well.
Is a used BOSCH 0261204944 engine ECU a good choice?
A used Ecu engine controller BOSCH 0261204944 for the Alfa Romeo 145 and 146 is a popular solution to reduce repair costs. A tested unit can operate correctly for a long time.
How can I check if the engine ECU 00467766410 fits my Alfa Romeo 145?
To make sure the Ecu engine controller 00467766410 is suitable for the Alfa Romeo 145, it is best to compare the part number with the marking found on the housing of the old ECU.
Is the Alfa Romeo 145 146 BOSCH engine ECU available in different variants?
Yes, the BOSCH Ecu engine controller for the Alfa Romeo 145 and 146 is available in two variants: a locked engine ECU or a virgin version. Before purchasing, it is worth reviewing the variant descriptions.
Why is the part number 0261204944 important when choosing an ECU?
The part number 0261204944 clearly identifies the BOSCH Ecu engine controller used in the Alfa Romeo 145 and 146. Matching the correct number is essential for proper vehicle operation after installation.
Does replacing the ECU 1037352979 improve engine performance in Alfa Romeo?
Replacing the Ecu engine controller 1037352979 in the Alfa Romeo 145 and 146 often restores smooth engine operation, stable RPM and increased driving comfort.
What should be checked before buying the BOSCH engine ECU 00467766410?
Before purchasing the BOSCH Ecu engine controller 00467766410 for the Alfa Romeo 145 and 146, it is worth checking the part number, available variant and detailed product description. This is the easiest way to avoid mistakes.
