A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine controller Chevrolet Matiz 1.0 5WY5442C00 96417301 NZ 1BBV
Vendors's code: 96417301
Product code: 5WY5442C00
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Engine controller Chevrolet Matiz 1.0 5WY5442C00 96417301 NZ 1BBV
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Genuine ECU for Chevrolet Matiz 1.0
Looking for an ECU for your Chevrolet Matiz 1.0? Ensure that the OEM numbers 96417301 and designation 5WY5442C00 match your current module.
This verified part comes with a 6-month warranty. We offer fast shipping. Order your controller at Auto24Parts today!
Engine Controller Chevrolet Matiz 1.0 – 5WY5442C00
This ECU is designed for the Chevrolet Matiz with a 1.0 engine. It is crucial to compare the identification numbers with the label on your existing module.
The offered part bears the markings 5WY5442C00, 96417301, NZ, 1BBV. Searching by these numbers helps find the right controller.
How to match the correct controller?
Before purchasing, compare the full OEM number and manufacturer designation with the label on your old controller. The car model and engine capacity alone may not be enough to confirm compatibility.
After replacement, programming the controller or matching the immobilizer may be necessary. The scope of required actions depends on the vehicle configuration. Check available part variants on the product page before purchase.
Part condition and warranty
The controller is a used, genuine part that has been checked and tested. The product comes with a 6-month warranty. Auto24Parts offers fast shipping.
FAQ – Questions and Answers
Does the 96417301 controller fit every Chevrolet Matiz 1.0?
Do not assume compatibility solely based on the car model. Compare the number 96417301, designation 5WY5442C00, and engine code.
What does the number 5WY5442C00 mean?
This is the identification designation of the controller. It is worth checking it together with the OEM number 96417301 to reduce the risk of purchasing the wrong part.
Are the NZ 1BBV markings important when selecting an ECU?
Yes. The markings NZ and 1BBV provide additional identification information. Compare them with the other numbers on your module before ordering.
Does a used engine controller require programming?
Depending on the car version and module configuration, programming or immobilizer matching may be necessary. Before installation, it is advisable to confirm the required actions with a workshop.
What if the numbers on my controller are not identical?
Do not choose a part based solely on similar appearance. Before purchasing, send the seller a photo of the label and controller numbers to confirm compatibility.
