A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
Engine controller Chevrolet Matiz 1.0 96801808 1BPB 9J 5WY5451A
Vendors's code: 1BPB9J
Product code: 96801808
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU for Chevrolet Matiz 1.0
Looking for an engine controller for Chevrolet Matiz 1.0? Ensure the OEM number 96801808 and identifier 1BPB 9J 5WY5451A match your current module.
This is a verified part with a 6-month warranty. We offer fast shipping. Order now at Auto24Parts!
Engine controller Chevrolet Matiz 1.0 – 96801808
This ECU is designed for the Chevrolet Matiz with a 1.0 engine. Before purchasing, compare the identification numbers on your current module's label.
This part features identifiers 96801808, 1BPB 9J, 5WY5451A, which are crucial for confirming compatibility.
How to verify controller compatibility?
Compare the full OEM number and manufacturer identifier with your old controller's label. The vehicle model and engine capacity alone may not be sufficient to confirm compatibility.
After replacement, programming or immobilizer matching may be necessary. Consult with a workshop to confirm the required actions.
Part condition and warranty
This is a used, original part that has been thoroughly tested. We offer a 6-month warranty. Auto24Parts ensures fast shipping.
FAQ – Questions and Answers
Does the 96801808 controller fit every Chevrolet Matiz 1.0?
Not always. Check the number 96801808, identifier 1BPB 9J 5WY5451A, and engine code before purchasing.
What does the 1BPB 9J identifier mean?
This is the controller's identification code, which should be compared with the OEM number 96801808 to avoid purchasing the wrong part.
Is programming required after replacing the controller?
Programming or immobilizer matching may be necessary. Consult with a workshop to confirm the required actions.
What if the numbers on my controller are not identical?
Do not choose a part based solely on similar appearance. Send the seller a photo of the label and controller numbers to confirm compatibility.