A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
Seat belt pretensioner Opel Corsa C right front 09114886
Vendors's code: 09114886
Product code: 09114886
Barcode:
Code 39:
ISBN:
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
How can you check whether the seat belt pretensioner 09114886 will fit?
This is a seat belt pretensioner with the number 09114886 for Opel Corsa C. This is a used part. Before ordering, compare the number with the one on your part.
Seat belt pretensioner Opel Corsa C right front 09114886
The seat belt pretensioner 09114886 is a part used in Opel Corsa C. This is a used part. Shipping or personal collection is available.
Markings to compare
- 09114886 – OEM number
- side and position: right front
Application according to the listing
- make and model: Opel Corsa C
The pretensioner must match by side and position (front or rear), so check these together with the number.
How this part works
The airbag control unit constantly checks the pretensioner circuit and, if there is a fault, lights the airbag warning light and stores a fault code.
When to check this part
It is worth checking the part when:
- the pretensioner fired in a collision,
- the belt does not retract or locks for no reason,
- the car is being repaired after a crash in which the airbags deployed.
Before fitting
Before starting, switch off the ignition, disconnect the battery and wait for the time given by the car maker. After fitting, clear the airbag fault codes and check that the warning light goes out when you switch on the ignition.
Questions and answers
| How can I check if the part fits my car? |
|---|
| Compare the number 09114886 with the one on your part, then check the car model and the side and position of the pretensioner. |
| What condition is the part in? |
| This is a used part. The photos in the listing show the actual item. |
| Do I need to clear the airbag fault after replacing the pretensioner? |
| Yes. After fitting, clear the fault codes in the airbag control unit with a diagnostic tester and check that the warning light goes out a few seconds after you switch on the ignition. |
Not sure which number is right? Send a photo of the label to contact@auto24parts.com and we will help.