A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine Controller FIAT 500 MJD8F3X1 55267355
Vendors's code:
Product code: AFD3-5455B
Barcode:
Code 39:
ISBN:
€284.55
Price
€284.55
Regular price:
€284.55
0%
€350.00
Price
€350.00
Regular price:
€350.00
0%
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine Controller FIAT 500 MJD8F3X1 55267355
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
€30.00
-
shipping
(Poland)
from
€30.00
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU engine controller Fiat 500 MJD8F3X1 55267355
The original Fiat 500 ECU engine controller with numbers MJD8F3X1 / 55267355 is available in locked or unlocked version – check the description of variants before purchasing.
What is the Ecu engine controller Fiat 500 MJD8F3X1?
The Ecu engine controller MJD8F3X1 in the Fiat 500 is an electronic unit that controls the engine operation. It ensures stable vehicle startup, smooth operation of the powertrain, and maintains proper engine parameters while driving.
How does the Ecu engine controller 55267355 work?
The Ecu engine controller 55267355 manages the powertrain operation based on signals from the vehicle sensors. It ensures the engine runs evenly, maintains proper parameters, and responds smoothly under various driving conditions.
Do the numbers MJD8F3X1 and 55267355 refer to the same Ecu engine controller?
Yes, the designations MJD8F3X1 and 55267355 refer to the same Ecu engine controller of the Fiat 500. Differences arise from manufacturer codes, but the function remains identical.
Which Fiat 500 models are compatible with the Ecu engine controller MJD8F3X1?
The MJD8F3X1 controller is used in selected Fiat 500 models. If this number is on your controller, it indicates full compatibility with the engine and vehicle equipment.
Is the Ecu engine controller 55267355 available in different variants?
Yes, the 55267355 controller is available in the variants: standard and IMMO OFF. Before purchase, it is recommended to check the variant descriptions to select the version suitable for your car.
When should the Ecu engine controller MJD8F3X1 be replaced?
Replacing the MJD8F3X1 is recommended when there are problems starting the vehicle, uneven engine operation, or electronic errors. A functioning controller restores driving comfort and safety.
Why is the number 55267355 important?
The number 55267355 allows precise matching of the controller to the correct engine version of the Fiat 500. Matching the part number is essential for proper operation and trouble-free installation.
