The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
ECU Engine Controller FIAT 500 MJD8F3X1 55267355
Vendors's code:
Product code: AFD3-5455B
Barcode:
Code 39:
ISBN:
£226.46
Price
£226.46
Regular price:
£226.46
0%
£278.55
Price
£278.55
Regular price:
£278.55
0%
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
ECU Engine Controller FIAT 500 MJD8F3X1 55267355
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.88
-
shipping
(Poland)
from
£23.88
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU engine controller Fiat 500 MJD8F3X1 55267355
The original Fiat 500 ECU engine controller with numbers MJD8F3X1 / 55267355 is available in locked or unlocked version – check the description of variants before purchasing.
What is the Ecu engine controller Fiat 500 MJD8F3X1?
The Ecu engine controller MJD8F3X1 in the Fiat 500 is an electronic unit that controls the engine operation. It ensures stable vehicle startup, smooth operation of the powertrain, and maintains proper engine parameters while driving.
How does the Ecu engine controller 55267355 work?
The Ecu engine controller 55267355 manages the powertrain operation based on signals from the vehicle sensors. It ensures the engine runs evenly, maintains proper parameters, and responds smoothly under various driving conditions.
Do the numbers MJD8F3X1 and 55267355 refer to the same Ecu engine controller?
Yes, the designations MJD8F3X1 and 55267355 refer to the same Ecu engine controller of the Fiat 500. Differences arise from manufacturer codes, but the function remains identical.
Which Fiat 500 models are compatible with the Ecu engine controller MJD8F3X1?
The MJD8F3X1 controller is used in selected Fiat 500 models. If this number is on your controller, it indicates full compatibility with the engine and vehicle equipment.
Is the Ecu engine controller 55267355 available in different variants?
Yes, the 55267355 controller is available in the variants: standard and IMMO OFF. Before purchase, it is recommended to check the variant descriptions to select the version suitable for your car.
When should the Ecu engine controller MJD8F3X1 be replaced?
Replacing the MJD8F3X1 is recommended when there are problems starting the vehicle, uneven engine operation, or electronic errors. A functioning controller restores driving comfort and safety.
Why is the number 55267355 important?
The number 55267355 allows precise matching of the controller to the correct engine version of the Fiat 500. Matching the part number is essential for proper operation and trouble-free installation.
