A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.
ABS pump Peugeot 206 ATE 9652342980 10020700364 10097011143 5WK84108
Vendors's code: 10020700364
Product code: 9652342980
Barcode:
Code 39:
ISBN:
£108.42
Price
£108.42
£133.36
Price
£133.36
Ask about the product
ABS pump Peugeot 206 ATE 9652342980 10020700364 10097011143 5WK84108
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£22.86
-
shipping
(Poland)
from
£22.86
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Where to find number 9652342980 on Peugeot ABS pumps
Used ABS pump with control unit, number 9652342980, inspected before sale. Matched by the numbers on the block and sticker.
Used Peugeot 206 ABS pump with number 9652342980
The hydraulic block and control unit of this ABS pump form a single module that works with the wheel speed sensors in Peugeot 206 cars. You will find number 9652342980 on the label, and the full set of numbers is given in the description below. According to the listing, the pump comes from the Peugeot 206 model.
Numbers to compare
The numbers from the listing, as written on the labels and as a single string:
- 9652342980, original Peugeot number,
- 10.0207-0036.4 (catalogue format: 10020700364), hydraulic block manufacturer's number,
- 10.0970-1114.3 (catalogue format: 10097011143), control unit number,
- 5WK84108, additional number from the listing.
The full numbers matter, including their endings. If in doubt, send us a photo of your pump.
Symptoms of a faulty ABS pump or control unit
- the ABS stops working, although basic braking usually remains functional,
- brake fluid leaks from the hydraulic block, which requires immediate action,
- the ABS warning light comes on together with the stability control warning light,
- the ABS switches itself off shortly after the engine is started.
First check the wheel sensors, their wiring and the supply voltage. Only a fault code pointing to the module justifies replacing the pump. After fitting, clear the fault codes and, if necessary, bleed the brake system.
Questions and answers
| Where do I find number 9652342980 on my pump? |
|---|
| The numbers are stamped or printed on the aluminium hydraulic block, and the control unit has a separate sticker. Take a close-up photo of both places in good light. |
| Does a lit ABS warning light always mean a faulty pump? |
| No. Read the fault codes first, because the cause may be a wheel sensor, its wiring or too low a supply voltage. |
| Can I send a photo for a compatibility check? |
| Yes. Contact us and send a photo of the numbers on your original pump, and we will help you check whether this module will fit. |
| What condition is this pump in? |
| It is a used original part, inspected before sale. You will find the warranty period in the product features table. |
Not certain this is the right module? Send us the numbers from the label on your pump and we will help you compare them.
