Hidden inside every modern car is an advanced computer that constantly orchestrates the operation of the entire powertrain. We are talking about the engine control unit, commonly known as the ECU (Engine Control Unit) or ECM (Engine Control Module). This specific module decides on the fuel injection dose, ignition timing, boost pressure, and communication with other systems in the vehicle.
ECU Engine controller OPEL MERIVA 12249823FHWC MT35E 2.1
Vendors's code: MT35E
Product code: 12249823FHWC
Barcode:
Code 39:
ISBN:
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU Engine controller OPEL MERIVA 12249823FHWC MT35E 2.1
Which Opel Meriva models are compatible with ECU 12249823FHWC?
The ECU Engine controller OPEL MERIVA 12249823FHWC was used in selected Opel Meriva models. The FHWC and MT35E module handles precise engine management and communication with the vehicle's electronics during daily driving.
What is the function of the Opel ECU MT35E 2.1?
The engine controller MT35E 2.1 manages the key parameters of the engine in the Opel Meriva. It controls fuel injection, analyzes sensor data and communicates with other electronic systems to maintain stable operation.
What symptoms can a faulty 12249823FHWC controller cause?
A damaged 12249823FHWC engine computer or MT35E module may cause starting issues, uneven engine running or loss of power while driving. Every ECU offered is technically verified before shipment.
Why is the part number 12249823FHWC important when choosing an ECU?
The part number 12249823FHWC allows you to select the correct engine controller for a specific Opel Meriva version. Even similar-looking modules MT35E may have different software configurations.
Does the OPEL MERIVA 12249823FHWC MT35E controller require programming?
Depending on the vehicle version, the ECU Engine controller OPEL MERIVA 12249823FHWC MT35E 2.1 may require adaptation or programming after installation to ensure correct vehicle operation.