A properly functioning ABS system is the foundation of road safety. Its main task is to prevent wheel lock-up during emergency braking, which allows the driver to maintain full control of the vehicle. The heart of this system is the electronic ABS pump controller. When it fails, the system stops working. A proper diagnosis of the problem allows you to avoid unnecessary costs and quickly restore brake efficiency.
ECU Engine controller VW VOLKSWAGEN SEAT 1.4 TDI BOSCH 0281015433 045906013AB EDC17U01
Vendors's code: 045906013AB
Product code: 0281015433
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
ECU Engine controller VW VOLKSWAGEN SEAT 1.4 TDI BOSCH 0281015433 045906013AB EDC17U01
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Shipping
from
£23.08
-
shipping
(Poland)
from
£23.08
-
shipping
(Poland)
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
ECU ENGINE CONTROLLER VW VOLKSWAGEN SEAT 1.4 TDI BOSCH 0281015433 045906013AB EDC17U01
Tested ECU Engine controller for VW / Volkswagen / Seat 1.4 TDI (part numbers 0281015433 and 045906013AB, Bosch EDC17U01), with warranty and fast shipping.
ECU Engine controller VW VOLKSWAGEN SEAT 1.4 TDI BOSCH 0281015433 045906013AB EDC17U01
Which vehicles does the ECU Engine controller 0281015433 045906013AB (Bosch EDC17U01) fit for VW / Seat 1.4 TDI?
The ECU Engine controller VW VOLKSWAGEN SEAT 1.4 TDI BOSCH 0281015433 045906013AB EDC17U01 is used on selected VAG vehicles with the 1.4 TDI engine. It manages engine operation and works with the car’s onboard electronics in everyday driving.
To avoid ordering mistakes, match the exact numbers on your original unit: 0281015433 and 045906013AB (spacing on labels can vary). A direct number match is the safest way to confirm compatibility.
What does the Bosch EDC17U01 engine ECU 0281015433 do on a 1.4 TDI?
The Bosch EDC17U01 ECU Engine controller 0281015433 controls key engine parameters on a 1.4 TDI. It manages fuel delivery, processes sensor signals, and communicates with other modules.
A properly working ECU helps keep the engine running smoothly, improves throttle response, and supports stable performance both in city traffic and on longer trips.
What symptoms can a faulty VW / Seat 1.4 TDI ECU 045906013AB cause?
A faulty 045906013AB ECU may lead to starting issues, rough running, power loss, warning lights, or diagnostic communication errors. In some cases, security/immobilizer-related issues can also appear after replacement.
This 0281015433 / 045906013AB ECU Engine controller is checked before dispatch, so you receive a tested unit with warranty and fast shipping.
Why are part numbers 0281015433 and 045906013AB crucial when buying an ECU for 1.4 TDI?
Part numbers 0281015433 and 045906013AB help you select the correct ECU for your specific 1.4 TDI setup. Even similar-looking ECUs can differ in configuration or software, which can prevent proper operation after installation.
Before ordering, compare all markings on your original label (Bosch + OEM reference). This simple step significantly reduces the risk of a mismatch.
Does the ECU 0281015433 (EDC17U01) require coding after installation?
Depending on the vehicle version, the ECU 0281015433 (EDC17U01) may require adaptation/coding after installation. This is especially relevant when the ECU is linked to the immobilizer and security functions.
Matching both 0281015433 and 045906013AB makes replacement easier and improves the chance of a trouble-free install.
