A used engine control unit will not usually start your car straight away, because its memory holds the immobiliser data of the car it came from. We explain how ECU programming, coding and cloning differ, and which preparation option to choose for your replacement ECU.
Engine Control Unit Volkswagen, Seat 1.4 TDI Bosch EDC17U01 045906013AB 0281015433
Vendors's code: 0281015433
Product code: 0281015433
Barcode:
Code 39:
ISBN:
Select a product option:
Individual variants may differ in price
product option
Important: Depending on the ECU type and vehicle model, not all of the options listed below may be available.
To select the correct option for your vehicle and ECU, please contact us before purchasing:
contact@auto24parts.com
1. Locked
This option is intended for professional workshops with the required specialist equipment and technical knowledge.
The ECU has been removed from a vehicle intended for recycling and still contains the immobilizer data and other information from the previous vehicle. Before it can be used in another car, it must be unlocked and then programmed using specialist automotive diagnostic equipment.
2. Unlocked
Several preparation methods may be available. The possible options depend on the ECU type, vehicle model and immobilizer system. Please contact us before purchasing, as some preparation methods are not available for every ECU.
Our electronics specialists can prepare the ECU in one of the following ways:
a) ECU with PIN code (Car Pass)
The PIN code is supplied, but programming with a suitable diagnostic tool is still required. After installing the ECU, it must be reset using the supplied PIN code and then programmed to the vehicle’s immobilizer system.
b) VIRGIN ECU
The data from the previous vehicle is removed and the ECU is restored to a clean, factory-like state. After installation, it must be programmed to the vehicle using a compatible specialist diagnostic tool. Unless another preparation method is specified in the product description, this is the standard unlocking option for most of our ECUs.
c) Plug & Play – IMMO OFF
The immobilizer function is disabled in the ECU. After installation, the engine can start without additional immobilizer programming. Please note that the vehicle will no longer have an active immobilizer function, and an immobilizer warning light or fault code may remain, depending on the vehicle model.
d) Plug & Play – Automatic Programming
After installation, the ECU automatically learns and saves the required vehicle data. No additional programming is normally required.
e) Plug & Play – 1:1 Clone
The data from your original ECU is copied to another fully functional ECU. The cloned unit is then ready for installation without additional programming.
You must send us your original ECU so that we can transfer its data to the replacement unit.
The original ECU must have working communication with the vehicle, a diagnostic tool or our programming equipment. If the required data cannot be read, a complete 1:1 clone may not be possible.
3. Complete Plug & Play Set
A complete matched set containing the ECU, immobilizer components and all other parts required to start the vehicle without additional programming. All components supplied in the set must be installed in the vehicle.
Important:
Dispatch time depends on the selected option. If an unlocked or specially prepared version is ordered, the preparation service usually requires an additional 1–2 business days.
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Does ECU 045906013AB fit your 1.4 TDI?
Yes, if your Volkswagen or Seat with the 1.4 TDI engine uses a module with number 045906013AB and Bosch number 0281015433 (0 281 015 433). This EDC17U01 unit comes from a 2009 vehicle and is used and in working order.
Engine Control Unit Volkswagen, Seat 1.4 TDI Bosch EDC17U01 045906013AB 0281015433
2009 model year, the 1.4 TDI engine and the Bosch EDC17U01 family – these are the key details of ECU 045906013AB. The module controls the diesel engine in Volkswagen and Seat vehicles, handling fuel injection and turbo boost. Bosch gave it number 0281015433, typical of diesel engine ECUs.
How to identify this ECU
- 045906013AB – Volkswagen part number
- 0281015433 – Bosch number, shown on the sticker as 0 281 015 433
- EDC17U01 – Bosch Electronic Diesel Control ECU family
The letters AB at the end of the VW number denote the module version. Even with the same 1.4 TDI engine, vehicles were fitted with ECUs with different suffixes, so compare the full number.
Signs that the ECU may be faulty
- no start with a working starter motor and fuel supply,
- the ECU does not respond during diagnostics,
- a sudden reduction in power and the engine warning light on,
- the engine cutting out at random after moisture has got into the module.
Check the battery, earth terminals and module plug first – they are a common source of similar faults.
Unlocked or locked?
The locked option has the data and immobiliser of the donor vehicle stored in it. It is intended for workshops that will carry out the unlocking, programming and adaptation themselves. The unlocked option is prepared before the parcel is dispatched; this usually takes 1–2 working days.
Please note: not every ECU allows every method – PIN / CAR PASS, Virgin, IMMO OFF, auto programming or cloning. It depends on the number, software and immobiliser, so please ask us before buying. Description: ECU preparation options.
Questions and answers
| Does the year 2009 matter when choosing? |
|---|
| It helps narrow down the choice, but number 045906013AB on the label is what decides. |
| Will the vehicle start after fitting the locked version? |
| Not without unlocking and matching to the immobiliser – this work is done by a workshop. |
| What condition is the module in? |
| Used, in working order and in good condition. You will find the warranty period in the product features table. |
Send a photo of the label to contact@auto24parts.com and we will compare it with number 045906013AB.