Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

Engine Control Unit Volkswagen, Seat 1.4 TDI Bosch EDC17U01 045906013AB 0281015433

  • Part Type Engine control unit (ECU)
  • Vehicle Make and Model Volkswagen, Seat
  • Engine Type 1.4 TDI
  • Year of Manufacture 2009
  • Manufacturer Bosch
  • Manufacturer Part Number 0 281 015 433 / 0281015433
  • OEM Part Number 045906013AB
  • Part Number EDC17U01
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
Bosch
with VAT without VAT
Price €100.00
Availability:
product-availability-module In stock

Select a product option:

Individual variants may differ in price

Select 1) LOCKED 2) UNLOCKED / READY FOR PROGRAMMING
Click to check the logout options for this device
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type Engine control unit (ECU)
  • Vehicle Make and Model Volkswagen, Seat
  • Engine Type 1.4 TDI
  • Year of Manufacture 2009
  • Manufacturer Bosch
  • Manufacturer Part Number 0 281 015 433 / 0281015433
  • OEM Part Number 045906013AB
  • Part Number EDC17U01
  • Configuration Variants Locked / unlocked
  • Warranty 6-month warranty
  • Condition Used, working, in good condition
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician

Does ECU 045906013AB fit your 1.4 TDI?

Yes, if your Volkswagen or Seat with the 1.4 TDI engine uses a module with number 045906013AB and Bosch number 0281015433 (0 281 015 433). This EDC17U01 unit comes from a 2009 vehicle and is used and in working order.

Go to full description

Engine Control Unit Volkswagen, Seat 1.4 TDI Bosch EDC17U01 045906013AB 0281015433

2009 model year, the 1.4 TDI engine and the Bosch EDC17U01 family – these are the key details of ECU 045906013AB. The module controls the diesel engine in Volkswagen and Seat vehicles, handling fuel injection and turbo boost. Bosch gave it number 0281015433, typical of diesel engine ECUs.

How to identify this ECU

  • 045906013AB – Volkswagen part number
  • 0281015433 – Bosch number, shown on the sticker as 0 281 015 433
  • EDC17U01 – Bosch Electronic Diesel Control ECU family

The letters AB at the end of the VW number denote the module version. Even with the same 1.4 TDI engine, vehicles were fitted with ECUs with different suffixes, so compare the full number.

Signs that the ECU may be faulty

  • no start with a working starter motor and fuel supply,
  • the ECU does not respond during diagnostics,
  • a sudden reduction in power and the engine warning light on,
  • the engine cutting out at random after moisture has got into the module.

Check the battery, earth terminals and module plug first – they are a common source of similar faults.

Unlocked or locked?

The locked option has the data and immobiliser of the donor vehicle stored in it. It is intended for workshops that will carry out the unlocking, programming and adaptation themselves. The unlocked option is prepared before the parcel is dispatched; this usually takes 1–2 working days.

Please note: not every ECU allows every method – PIN / CAR PASS, Virgin, IMMO OFF, auto programming or cloning. It depends on the number, software and immobiliser, so please ask us before buying. Description: ECU preparation options.

Questions and answers

Does the year 2009 matter when choosing?
It helps narrow down the choice, but number 045906013AB on the label is what decides.
Will the vehicle start after fitting the locked version?
Not without unlocking and matching to the immobiliser – this work is done by a workshop.
What condition is the module in?
Used, in working order and in good condition. You will find the warranty period in the product features table.

Send a photo of the label to contact@auto24parts.com and we will compare it with number 045906013AB.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more