Skip to main content
In English +48 792 797 344 Polski +48 501 409 435 +48 32 201 72 96 En Español +34 63 727 27 85 contact@auto24parts.com
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Wishlist
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS pump and control module Jeep 52122931
  • ABS pump and control module Jeep 52122931
  • ABS pump and control module Jeep 52122931 - photo 2
  • Part Type ABS pump with control module
  • Vehicle Make and Model Jeep
  • OEM Part Number 52122931
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition
Trw
with VAT without VAT
Price €250.00
PLN GBP EUR USD
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price

PRODUCT DETAILS

  • Part Type ABS pump with control module
  • Vehicle Make and Model Jeep
  • OEM Part Number 52122931
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition

How do you check whether number 52122931 matches your part?

We offer a used, working and original ABS pump with control module for a Jeep. We do not state the model. The choice rests on a single number.

Go to full description

ABS pump and control module for a Jeep - 52122931

‘Which Jeep is it for?’ - that is the first question we hear. We do not state the model, because selection is by part number. This unit has part number (OEM) 52122931. If your old part carries the same number, you are on the right track. The unit is used, working and original.

The only number in the listing

  • 52122931 - part number (OEM): 52122931

One number means a quick check. Copy it from the label on the housing and read it digit by digit. It is easy to confuse 1 with 7 or 3 with 8. We do not define the role of the number.

When people look for this unit

Usually after symptoms like these:

  • the ABS light goes off and comes back on while driving,
  • the fault memory shows a control module fault,
  • ABS does not respond when braking on a slippery surface,
  • no wheel speed readings in the tester.

Check the inexpensive things first: the fuse, the earth and the module connector. Have the codes read at a garage. If they point to the unit itself, compare the number. Bleeding is essential after the replacement. Also ask about any coding that may be needed.

Before you click ‘buy’

Which Jeep model is this part for?
We do not state the model. What counts is that number 52122931 matches.
Could I mix up the digits?
Yes, which is why it is worth photographing the label and comparing it calmly.
Does this number refer to the control module?
We do not assign it a role. It is the part number (OEM) of the whole unit in this listing.
Will you help me read the number?
Yes. Send a photo of the label and we will try to read it.

Send us the number or a photo of the sticker. We will compare them and reply before the order is processed.

Latest Articles
See All

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more

  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more

  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more

  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more

  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more

  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more