Skip to main content
English $
English $
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English $
English $
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS pump and control module Jeep 68252642AG

  • Part Type ABS pump with control module
  • Vehicle Make and Model Jeep
  • OEM Part Number 68252642AG
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition
ORYGINAL
with VAT without VAT
Price $602.23
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from $30.11 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ABS pump with control module
  • Vehicle Make and Model Jeep
  • OEM Part Number 68252642AG
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition

68252642AG - what does the AG suffix mean and why is it worth checking?

This is an original ABS pump with control module for a Jeep. It is used and working. We do not state the model - the number, letters included, decides.

Go to full description

Jeep - ABS unit 68252642AG

We often get the question: ‘My number has no letters at the end - is it the same part?’ Do not assume so. This listing has part number (OEM) 68252642AG, and the letters AG are part of it. We do not state the model; the number is what counts. This Jeep unit is used, working and original.

A number with a letter suffix

  • 68252642AG - part number (OEM): 68252642AG

Compare the eight digits first, then the two letters. If the letters on your part are different, write to us. We will assess it individually. We do not assign a role to the number.

What the car is signalling

This unit is chosen by people who see:

  • an ABS failure message on the dashboard,
  • the brake warning light on together with ABS,
  • a pump power supply fault code in diagnostics,
  • a module that disappears from the list in the tester.

A message on the dashboard is only the beginning. Have a full fault code reading done. Inspect the sensor wiring and the condition of the battery. Replacing the unit makes sense when everything else is in order. After fitting, bleed the system and ask about configuration.

What customers want to know

Are 68252642AG and 68252642AF the same?
We do not assume so. A different suffix may indicate a different variant. Write to us.
Which Jeep model is it?
We do not state the model. Selection is by part number.
Where should I look for the number?
On the label or print on the unit's housing. Sometimes it needs cleaning.
Is this an original part?
Yes, it is a used, working, original unit.

Copy the number, letters included, and send it to us. We will confirm whether it matches this listing.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more