Skip to main content
English €
English €
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English €
English €
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS pump and control module Audi Bosch 80A614517P 0265291727 80A907379 0265956840

  • Part Type ABS pump with control module
  • Vehicle Make and Model Audi
  • OEM Part Number 80A 614 517 P / 80A614517P
  • ABS Pump Part Number 0 265 291 727 / 0265291727
  • ABS Pump Part Number 80A 907 379 / 80A907379
  • ABS Pump Part Number 0 265 956 840 / 0265956840
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition
Bosch
with VAT without VAT
Price €700.00
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from €30.00 - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ABS pump with control module
  • Vehicle Make and Model Audi
  • OEM Part Number 80A 614 517 P / 80A614517P
  • ABS Pump Part Number 0 265 291 727 / 0265291727
  • ABS Pump Part Number 80A 907 379 / 80A907379
  • ABS Pump Part Number 0 265 956 840 / 0265956840
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition

Do you need ABS assembly 80A614517P with control module 80A907379?

This used, working and genuine Bosch assembly for Audi combines hydraulic unit 80A 614 517 P with module 80A 907 379. The Bosch pump number is 0 265 291 727, and the match is based on the numbers agreeing.

Go to full description

Bosch hydraulic unit 80A614517P with module 80A907379

This assembly consists of an aluminium hydraulic block with valves, the pump motor and a bolted-on electronic control module. The markings on the block itself are applied by laser, and the Bosch number of the pump is laser-printed on the top edge of the control module housing. The label bears the marking ‘ZSB HYDROAGGREGAT ESP9’. On the side of the housing there is also number 2 265 106 528, whose role is not described.

Where to look for the numbers of this pump

  • 80A614517P - VAG number of the ABS pump (hydraulic unit), entry: 80A 614 517 P
  • 0265291727 - Bosch number of the hydraulic block (pump), laser-marked on the top edge of the control module housing: 0 265 291 727
  • 80A907379 - VAG number of the ABS/ESP control module, entry: 80A 907 379
  • 0265956840 - Bosch number of the control module, entry: 0 265 956 840
  • 2265106528 - Bosch number laser-marked on the side of the control module housing: 2 265 106 528 (no described role)

You will find the Bosch number of the pump on the top edge of the control module housing, while the VAG markings and the port symbols HZ1, HZ2, VL, VR, HL and HR should be checked on the block and the labels. The number on the side of the housing does not define a role, so when matching, rely on the other four.

How a failure may show itself

Trouble with this assembly may be indicated by:

  • an ABS warning light on the instrument cluster,
  • an internal control module fault stored in the memory,
  • no communication with the module during diagnostics,
  • the brake warning light on.

Before replacement, read the fault codes and check the wheel speed sensors, fuses, wires and the battery. After fitting, bleed the brake system, and on many VW Group cars code the control module with a diagnostic tool.

Most common questions - 80A614517P

Which car does this assembly fit?
We offer it for Audi. The right item is indicated by the pump and control module numbers, not by the make alone.
What condition is the assembly in, and what about the warranty?
It is a used, genuine and working part. The warranty period is given in the product features table.
Does the listing include the pump together with the control module?
Yes, it is a set: the hydraulic unit with the bolted-on control module 80A 907 379.
Is it enough to compare the Bosch number alone?
No. Set Bosch numbers 0 265 291 727 and 0 265 956 840 against the VAG numbers of the pump and the control module, because only the full set shows the complete version.

Send us a photo of the control module housing and the block, or your VIN, and we will tell you whether the numbers coincide.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more