Skip to main content
English zł
English zł
Open search engine
Search
Close search engine Clear Search
Open search engine
Search
Close search engine Clear Search
English zł
English zł
Products in the cart: 0. See details
Open search engine
Search
Close search engine Clear Search

ABS pump and control module Audi Bosch 4F0614517 0265234114 4F0910517D 0265950360

  • Part Type ABS pump with control module
  • Vehicle Make and Model Audi
  • OEM Part Number 4F0 614 517 / 4F0614517
  • ABS Pump Part Number 0 265 234 114 / 0265234114
  • ABS Pump Part Number 4F0 910 517 D / 4F0910517D
  • ABS Pump Part Number 0 265 950 360 / 0265950360
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition
Bosch
with VAT without VAT
Price 600,00 zł
Availability:
product-availability-module In stock
pcs.

Fast Delivery

DHL Express - 30 euro

6 Month Warranty

Returns Possible up to 14 days

Secure payments

Stripe - Paypal - Credit Card
Ask about the product
Shipping from 120,00 zł - shipping (Poland)

Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price


PRODUCT DETAILS

  • Part Type ABS pump with control module
  • Vehicle Make and Model Audi
  • OEM Part Number 4F0 614 517 / 4F0614517
  • ABS Pump Part Number 0 265 234 114 / 0265234114
  • ABS Pump Part Number 4F0 910 517 D / 4F0910517D
  • ABS Pump Part Number 0 265 950 360 / 0265950360
  • Warranty 6-month warranty
  • Testing & Inspection Device thoroughly inspected and tested by a certified technician
  • Condition Used, working, in good condition

How can you be sure ABS pump 4F0614517 is the right part?

We are offering a used, working Bosch unit intended for Audi. The block shows the number 4F0 614 517 - with no letter at the end - and the control module 4F0 910 517 D; these are the markings to compare with your part.

Go to full description

Bosch ABS unit 4F0614517 / 0265234114 with module 4F0910517D

Each number on this unit has a different job. 4F0 614 517 is the VAG designation of the hydraulic unit, and 0 265 234 114 is the Bosch number of the same block; at Bosch, the prefix 0 265 2 is what identifies a block with pump. The electronic module has its own pair: VAG 4F0 910 517 D and Bosch 0 265 950 360. Note that the pump number has no suffix letter.

Car manufacturer and parts supplier markings

  • 4F0614517 - ABS pump - VAG number without a suffix letter (4F0 614 517)
  • 0265234114 - hydraulic block - Bosch number (0 265 234 114)
  • 4F0910517D - ABS/ESP control module - VAG number (4F0 910 517 D)
  • 0265950360 - control module - Bosch number (0 265 950 360)

The sticker with the hydraulic unit numbers is on the block, which also has the port markings HZ1, HZ2, VL, VR, HL, HR stamped into it; the second label is on the control module housing, and one of them bears the word ‘ESP’. Our shop has 8 other listings with the base number 4F0 614 517 followed by a letter - if your number ends in a letter, choose the listing with exactly the same suffix.

Signs of ABS unit failure

Typical signs that something is wrong with the unit:

  • warning light visible as soon as the car starts,
  • ABS and ESP/ASR switching off at the same time,
  • hydraulic valve fault in the control module memory.

Start the diagnosis with a scan tool and an inspection of the wheel speed sensors, wiring and fuses. After fitting, bleed the brake system, code the control module if required and, on cars with ESP, usually calibrate the steering angle sensor as well.

FAQ: ABS pump 4F0614517

Will this pump fit my Audi?
It will if the numbers in your car match: 4F0 614 517 on the block and 4F0 910 517 D on the module. We do not match it by car model.
Does the part come with a warranty?
The warranty period is shown in the product features table. We sell a genuine, used unit in working order.
My number has a letter at the end - will this unit do?
It is better not to assume so. The letter denotes the version, and a different version may differ in its configuration. Choose the listing with exactly the same number as in your car.
How do I check compatibility before ordering?
Take photos of the labels on the block and the control module, or give us your VIN - we will verify the details and reply with the result.

Not sure? A photo of the sticker on your unit is all it takes, and we will compare it with this one.

  • How to Check the Operation of a Transmission Control Module - Symptoms

    A faulty transmission control module (TCM) most often causes limp mode with the gearbox stuck in one gear, harsh jolts when you select D or R, erratic gear changes, flashing PRND letters and a gearbox or engine warning light. However, the same symptoms are often caused by a low gearbox oil level, a weak battery, a poor earth or a faulty sensor. To test a transmission control module, start by checking the battery and reading the fault codes with a diagnostic tool that can talk to the gearbox control unit, then check the power supply, the connector, the oil and the live data. Below we explain the symptoms, the diagnostic steps and what the most common fault codes mean.

    Read more
  • Burned Engine Control Unit: Symptoms, Causes, and the Optimal Solution

    A burned engine control unit (ECU) usually causes a sudden no-start: the engine cranks but will not start, the diagnostic tool cannot connect to the ECU, and the engine management light does not come on when you switch on the ignition. The most common causes are a voltage spike when jump-starting, reversed battery polarity, a faulty voltage regulator and a short circuit in the wiring loom or in an actuator. Below we explain how to tell a burned ECU from a power supply fault, what causes this kind of failure and how to choose a replacement ECU.

    Read more
  • Flooded Automatic Transmission Control Module or Burnt TCM - Symptoms

    A burnt-out or flooded automatic transmission control module (TCM) usually causes sudden symptoms: limp mode with the gearbox stuck in one gear, harsh thumps when you select D or R, no response to the gear selector, flashing or blank PRND letters and no communication between the diagnostic tool and the gearbox control unit. Flooding is most often caused by blocked scuttle panel drains, washing the engine bay or coolant in the gearbox oil, and a burnout by overheating, a short circuit or a voltage spike. Below we explain the symptoms, what to do straight away and why drying out or repairing such a control unit rarely gives a lasting result.

    Read more
  • Water-damaged ABS pump control module or a burnt-out one - what next?

    A water-damaged or burnt-out ABS pump control module most often lights up the dashboard like a 'Christmas tree' (ABS, ESP and the red brake warning light), leaves the diagnostic tool unable to communicate with the ABS module, makes the pump motor run non-stop or stops the speedometer working. Water usually gets into the module when the scuttle panel drains are blocked, after the engine bay has been cleaned with a pressure washer or after driving through a deep puddle, while a burnout is most often caused by a short circuit or a voltage spike. Below we describe the symptoms, what to do straight away and why drying or repairing such a module rarely gives lasting results.

    Read more
  • Flooded engine control unit - symptoms, consequences and what to do

    A flooded engine control unit (ECU) most often causes a no-start, a 'Christmas tree' of warning lights on the dashboard, no communication with the diagnostic tool, or rough running in limp mode. Water usually gets into the ECU from blocked scuttle drains, after the engine bay has been cleaned with a pressure washer, or after driving through deep water. Below we describe the symptoms of a water-damaged ECU, what to do straight after the ECU gets wet, and why drying or repairing it rarely gives lasting results.

    Read more
  • How to test an ABS module and pump - failure symptoms and checks

    The most common symptom of a faulty ABS pump or ABS module is an ABS warning light that stays on after the engine starts, often together with the ESP light. The brakes still work, but without ABS the wheels can lock under hard braking. To test an ABS module, start by reading the fault codes with a diagnostic tool that can talk to the ABS unit, then check the power supply, the earth and the wheel speed sensors. Only when all of these are fine is the module itself usually to blame.

    Read more