Kia ABS Pumps and Control Modules

Kia ABS Pump – Complete ABS / ESP Hydraulic Unit with Controller

A Kia ABS pump is a complete braking-system assembly combining a hydraulic unit with an electronic ABS control module. Depending on the vehicle equipment, the same assembly may also work with ESP, ESC or traction-control functions.

The Kia ABS category contains complete used original units intended for replacement when the hydraulic pump, electronic controller or complete ABS assembly has failed.

These parts may be searched for as:

• Kia ABS pump,
• Kia ABS module,
• Kia ABS control unit,
• Kia ABS pump and controller,
• Kia ESP pump,
• Kia hydraulic ABS unit,
• Kia ABS ECU.

Because one Kia model can use several ABS-system versions, the complete numbers from the original assembly are more important than the model name alone.

How to choose the correct Kia ABS pump

Before ordering a replacement ABS assembly, compare all identification numbers visible on the original unit.

Check:

• complete Kia OEM number,
• ABS pump or hydraulic-unit number,
• electronic ABS controller number,
• manufacturer number,
• all suffix letters and digits,
• vehicle model and production year as supporting information.

A similar housing, the same connector or the same Kia model does not automatically mean that two ABS pumps are interchangeable.

Kia ABS part numbers – 58910, 58920 and 58500

Many Kia ABS assemblies in the Auto24Parts catalogue use OEM references beginning with:

• 58910...,
• 58920...,
• 58500....

Examples currently found in the Kia ABS catalogue include:

• 58910H8480 / BE600EEV10 / A1002774ACC,
• 58500-CJ000 / A3C09505704,
• 58500CJ200 / A3C0950570003 / BA60003420,
• 58910-R2040 / BE600NEC00,
• 58910-R2130 / BE600MEC32 / A1003761AAA,
• 58910-2K110 / BE6003K503,
• 58910-2K510 / BH6013H102 / BE6003H110,
• 58910-07800 / 5WY7856D.

The shared 58910 or 58500 prefix identifies a broad Kia part family and does not confirm compatibility. Always compare the complete reference.

Kia 58910H8480 / BE600EEV10 ABS pump

One current product is the Kia ABS pump 58910H8480 / BE600EEV10.

The complete unit carries the following important references:

• 58910H8480,
• 58910-H8480,
• BE600EEV10,
• BE600-EEV10,
• A1002774ACC.

This product is supplied as a complete ABS assembly containing both the hydraulic pump and the electronic control module.

When replacing this unit, the Kia reference and electronic-controller numbers should be compared together rather than using only one of the markings.

Kia Picanto – 1Y589-20100 / 58910-1Y300 / 61589-44200

The catalogue also includes the Kia Picanto ABS pump 1Y589-20100 / 58910-1Y300 / 61589-44200.

The main references are:

• 1Y589-20100,
• 1Y58920100,
• 58910-1Y300,
• 589101Y300,
• 61589-44200.

This example shows why a complete ABS assembly may have separate identification numbers for the hydraulic unit and electronic controller.

Kia Picanto – 5891007300 / BH60103500 / 5WY numbers

Other Kia Picanto ABS assemblies in the catalogue include the OEM number 5891007300 together with references such as:

• BH60103500,
• 0295607001,
• 5WY7513A,
• 5WY7401B.

The different 5WY controller references demonstrate why the complete electronic number should be checked even when the Kia pump number appears similar.

Kia 58500-CJ000 / A3C09505704

Another current Kia ABS assembly uses:

• 58500-CJ000,
• 58500CJ000,
• A3C09505704.

When the original pump carries the 58500-CJ000 reference, it is useful to compare the A3C electronic number as well.

Kia Sportage Hybrid – 58500CJ200 / A3C0950570003

The Kia catalogue also contains an ABS assembly listed for Kia Sportage Hybrid with the following references:

• 58500CJ200,
• A3C0950570003,
• BA60003420.

This is a different version from 58500-CJ000, so the shared 58500 prefix should never be treated as confirmation that the units are interchangeable.

Kia 58910-2K110 and 58910-2K510 – similar numbers, different units

The catalogue contains several ABS units from the 2K number family, including:

• 58910-2K110 / 589102K110 / BE6003K503,
• 58910-2K510 / 589102K510 / BH6013H102 / BE6003H110,
• 589102K130 / BE6003K506.

These references look similar but represent different complete part numbers. Do not select a replacement using only the beginning of the number.

Kia 58910-R2040 and 58910-R2130

Another useful example is the Kia R2 family:

• 58910-R2040 / 58910R2040 / BE600NEC00,
• 58910-R2130 / 58910R2130 / BE600MEC32 / A1003761AAA.

The difference between R2040 and R2130 is important. Both the OEM number and the corresponding electronics reference should be checked.

Kia 58900-B2534 / 58920B253

The Kia catalogue also includes a complete ABS unit identified by:

• 58900-B2534,
• 58900B2534,
• B258920560,
• 58920B253.

Here the complete pump and electronic section carry different reference formats, making it particularly important to read the entire original label before ordering.

Why are there several numbers on a Kia ABS pump?

A complete ABS assembly can contain more than one identifiable component. Depending on the manufacturer and generation, the label may include:

• Kia OEM number,
• hydraulic block reference,
• electronic control module number,
• manufacturer production number,
• hardware or software identification.

For accurate selection, it is best to compare as many of these numbers as possible.

Complete Kia ABS pump vs electronic ABS control unit

The products in this category are complete ABS assemblies containing the hydraulic section and controller.

If only the electronic module is required, see the ABS / ESP / ASR control units category.

A complete ABS pump normally contains:

• hydraulic valve block,
• electric pump motor,
• solenoid valves,
• electronic ABS / ESP controller.

Before ordering, determine whether the vehicle requires the complete assembly or only a separate electronic component.

Common symptoms of a Kia ABS system problem

Possible symptoms may include:

• ABS warning light,
• ESC / ESP or traction-control warning light,
• ABS function unavailable,
• loss of communication with the ABS controller,
• pump-motor fault codes,
• hydraulic valve fault codes,
• brake-pressure-related faults,
• intermittent ABS / ESC operation.

These symptoms do not automatically prove that the complete Kia ABS pump is faulty.

ABS warning light in a Kia – what should be checked?

Before replacing the ABS pump, diagnostics should also include components that can cause similar symptoms.

Depending on the vehicle, check:

• wheel-speed sensors,
• sensor wiring,
• wheel bearings or encoder rings,
• power supply and ground,
• fuses and relays,
• ABS connector and pins,
• CAN communication,
• steering-angle and other stability-system sensors.

Diagnostic trouble codes and live data can help distinguish a sensor or wiring fault from a problem inside the ABS assembly.

No communication with the Kia ABS module

If a diagnostic tester cannot connect to the ABS controller, check:

• constant power supply,
• ignition supply where applicable,
• ground connections,
• fuses,
• connector condition,
• corroded or damaged pins,
• CAN communication wiring.

No communication may indicate an internal electronic fault, but vehicle-side electrical problems can cause the same symptom.

Does a used Kia ABS pump require coding?

Not every Kia ABS pump uses the same replacement procedure.

Depending on the model, production year and ABS / ESC system, installation may require:

• coding or configuration,
• ABS / ESC basic settings,
• steering-angle sensor calibration,
• other sensor calibration,
• diagnostic activation of hydraulic valves during bleeding.

Other Kia systems may require fewer procedures. Coding should therefore be confirmed for the exact part number rather than assumed for every Kia ABS pump.

Bleeding the brake system after ABS pump replacement

Replacing a complete hydraulic ABS pump opens the vehicle's brake-fluid circuit, so the system must be properly bled after installation.

Depending on the Kia ABS system, a diagnostic tool may be required to activate internal valves or the pump motor during the bleeding procedure.

Because the ABS assembly is part of the braking system, installation and bleeding should be performed by a suitably qualified workshop.

How to search for a Kia ABS pump by part number

The most accurate search method combines the Kia OEM number with the controller or manufacturer number.

Useful search examples include:

• Kia ABS pump 58910H8480 BE600EEV10,
• Kia ABS module 58910-H8480 A1002774ACC,
• Kia Picanto ABS pump 58910-1Y300 61589-44200,
• Kia ABS pump 58500-CJ000 A3C09505704,
• Kia Sportage Hybrid ABS 58500CJ200 A3C0950570003,
• Kia ABS pump 58910-2K110 BE6003K503,
• Kia ABS module 58910-2K510 BE6003H110,
• Kia ABS pump 58910-R2040 BE600NEC00,
• Kia ABS pump 58910-R2130 BE600MEC32,
• Kia ABS pump 58900B2534 58920B253.

Searching by complete numbers is much more precise than using only a phrase such as “Kia ABS pump”.

Selected Kia ABS pumps

For newer Kia applications, see the Kia 58910H8480 / BE600EEV10 / A1002774ACC complete ABS pump.

For Kia Picanto, the catalogue also includes the 1Y589-20100 / 58910-1Y300 / 61589-44200 ABS assembly.

Related Kia and ABS categories

• Complete ABS Pumps
• ABS / ESP / ASR Control Units
• Kia Engine Control Units – ECU
• Electronic Car Parts

How to confirm Kia ABS pump compatibility

If you are unsure which unit is correct, contact Auto24Parts.

For compatibility verification, send:

• a clear photo of the complete original ABS assembly,
• Kia OEM number,
• hydraulic pump number,
• ABS controller number,
• all additional manufacturer references,
• vehicle model,
• production year.

The complete combination of numbers from the original Kia ABS pump is the safest basis for selecting a replacement.

Ordering, Payment, Delivery and Returns

Information about ordering is available in our How to Buy guide. Payment options are listed under Secure Payment Methods, while shipping information is available on the Shipping & Delivery page.

Current information about returns, complaints and warranty is available under Returns, Warranty & Complaints.

FAQ – Kia ABS Pumps and Control Modules