The engine control unit (often referred to as ECU or ECM) is the most important electronic module in every modern vehicle. It acts as the main computer managing the operation of the power unit, analyzing signals from numerous sensors in real-time. It is responsible for precise fuel dosing, ignition timing, boost pressure, and the operation of exhaust gas treatment systems. When this crucial component fails, normal operation of the car becomes impossible. When faced with electronic problems, many drivers consider complicated diagnostics, circuit testing, and attempting to repair integrated circuits. In practice, the fastest, safest, and most cost-effective solution is to replace the damaged component with a fully functional, original used part from the aftermarket.
Engine Control Unit Alfa Romeo 159 2.2 JTS 0261S01034 00552030480 055203048
Vendors's code: 00552030480
Product code: FDFD-24990
Barcode:
Code 39:
ISBN:
Wybierz wariant produktu:
Individual variants may differ in price
Warranty
Attention : Depending on the type of engine controller and car model, not every variant from the list below is available.
To choose the correct variant for your car and model engine controller please contact with us :
1.Locked: This variant is intended for workshops that have specialized equipment and knowledge.
Engine computer removed from a car intended for recycling with data saved from the previous car and immobilizer. To use this controller it is required to unlock it and then perform the programming procedure. For this purpose, it is necessary to use specialized diagnostic equipment for electronics.
2.Unlocked: There are many variants of the possible unlock device , so please contact us before purchasing because, depending on the type and model of the car or controller itself make some unlocking options not possible.
The controller can be prepared for assembly by our electronics in various ways: the list below
a) ECU with read PIN code (CAR PASS) - Required programming by diagnostic device. After the assmbly of the ecu to the car you need to reset that controller by typing in the pin code, and then performing the procedure of programming the immobilizer to your car
b) Cleaned Ecu out of the data of the previus car (VIRGIN). The ECU is reset to factory settings, prepared as clean. After installation in the car, it requires programming by using a specialized diagnostic device (STANDARD Unlocking of most of our ECUs if not specified the unlocking form)
c)Plug & Play (IMMO OFF) - excluded immobilizer, it has removed the safety codes from the ecu. Once its connected ecu to the car the engine runs and it does not require any programming, but it does not have the immobilizer function. - No need additional programming
d) Plug & Play (AUTO PROGRAMMING) - after assembly the ecu in the car, ECU will automatically program itself to your car. Does not require any programming
e) Plug & Play (CLON) - a cloned controller prepared for installation in a car without the need for programming. This device is copied 1 to 1 from the old device and the data is transferred to another properly working computer by our electrician service technician
Have to send us the damaged driver from which the data will be transferred to another, properly working computer.
Broken ecu HAS to have working communication with the car or diagnostic device , without proper communication Security code cant be cloned.
3.Complete: Plug & Play complete set ecu with immobilizer and all elements needed to start the vehicle without need for additional programming. Have to replace all the elements sent by us in your car.
Attention :
Delivery time depends on the selected variant: if the unlocked version is selected,
the unlocking service takes an additional time of around 1-2 business days
Ask about the product
Administratorem danych osobowych jest Auto24parts. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Price 30 euros applies shipments to 5 kg on worldwide. Above this weight, please contact us by email to check price
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Ecu engine controller Alfa Romeo 159 2.2 JTS 0261S01034 00552030480 055203048
Ecu engine controller with part numbers 0261S01034, 00552030480 and 055203048 for Alfa Romeo 159 2.2 JTS is a reliable replacement solution – available in locked or virgin version, check the description before choosing.
Is the engine controller 0261S01034 compatible with Alfa Romeo 159 2.2 JTS?
The engine controller with part numbers 0261S01034, 00552030480 and 055203048 is used in Alfa Romeo 159 with the 2.2 JTS engine. It is responsible for controlling engine operation and ensuring its proper performance. In our store, two variants are available: the engine controller in locked or logged-out version – before choosing, please review the variant descriptions.
What do the numbers 00552030480 and 055203048 mean in the engine controller?
The numbers 00552030480 and 055203048, as well as 0261S01034, identify a specific engine controller installed in Alfa Romeo 159 2.2 JTS. They allow proper matching of the unit to the vehicle. We offer the engine controller in locked or logged-out version – details can be found in the product description.
Does the Alfa Romeo 159 engine controller with number 055203048 require adaptation?
When replacing the engine controller 055203048 or 0261S01034, adaptation to the vehicle may be necessary. The scope depends on the selected variant. In the store, the engine controller is available in locked and logged-out version – before purchasing, check the description.
Which model is the engine controller 00552030480 suitable for?
The engine controller marked with number 00552030480, also appearing as 0261S01034 and 055203048, is used in Alfa Romeo 159 with the 2.2 JTS engine. It is a component managing the operation of the power unit. We offer two variants: locked or logged-out engine controller – we encourage you to review the description before choosing.
How to check compatibility of the engine controller 0261S01034 with the vehicle?
To confirm compatibility, compare the number 0261S01034, 00552030480 or 055203048 with the engine controller currently installed in the vehicle. Matching numbers confirm proper compatibility with Alfa Romeo 159 2.2 JTS. In our store, two variants are available: engine controller in locked and logged-out version – details can be found in the product description.