Instrument Clusters and Speedometers – Search by Part Number

Instrument Cluster – Speedometer, Dashboard and Gauge Assembly

An instrument cluster is the dashboard assembly that provides the driver with important vehicle information. Depending on the vehicle, it may include the speedometer, tachometer, fuel gauge, coolant temperature gauge, warning lights, odometer and electronic display.

The same component may be searched for using several terms:

• instrument cluster,
• speedometer cluster,
• dashboard cluster,
• gauge cluster,
• dashboard instruments,
• speedometer assembly,
• instrument panel,
• dashboard display.

Regardless of the terminology, the complete part number is normally the safest way to identify the correct replacement.

How to choose the correct instrument cluster

Different versions of an instrument cluster may be fitted to the same vehicle model. Differences can relate to the engine, gearbox, equipment level, market version, display type or electronics.

Before ordering, compare:

• complete OEM part number,
• manufacturer number,
• all suffix letters and digits,
• additional hardware or software references where present,
• vehicle model,
• engine version,
• transmission type where relevant,
• production year as supporting information.

Similar appearance, identical connectors or the same vehicle model do not automatically confirm compatibility.

Why the full instrument cluster number matters

Dashboard clusters often have several very similar versions. A small change in the final letter or digit can indicate a different electronic or vehicle configuration.

For example, Ford Fiesta clusters in the catalogue include references such as:

• 8A6T-10849-EL / VP8A6F-10849-EM,
• 8A6T-10849-GK / VP8A6F-10849-GL,
• 8A6T-10849-AB / VP8A6T-10849-AB.

The shared 8A6T-10849 family does not mean that these clusters should automatically be treated as interchangeable.

Ford instrument clusters – Visteon 10849 numbers

Many Ford dashboard clusters use part numbers containing the 10849 engineering reference. Visteon is a common manufacturer of these units.

One example is the Ford Fiesta Visteon 8A6T-10849-EL / VP8A6F-10849-EM instrument cluster.

Important references:

• 8A6T-10849-EL,
• 8A6T10849EL,
• VP8A6F-10849-EM,
• VP8A6F10849EM.

The complete suffix should be retained when comparing the original cluster.

Ford Focus – BM5T instrument cluster numbers

The catalogue also includes a Ford Focus BM5T-10849-AL instrument cluster.

This unit carries several useful references:

• BM5T-10849-AL,
• BM5T-14C228-AC,
• BM5T-14C028-AJ.

This demonstrates why checking all numbers printed on a cluster can provide more accurate identification than using only one reference.

Audi instrument clusters

Audi dashboard clusters commonly use VAG-style OEM numbers beginning with model-specific prefixes such as 8P0... or 4F0....

One example is the Audi instrument cluster 8P0980930F.

Another is the Audi A6 4F0920933J / 4F0910930C cluster.

The Audi A6 unit carries:

• 4F0920933J,
• 4F0 920 933 J,
• 4F0910930C,
• 4F0 910 930 C.

Both spaced and compact versions of OEM numbers are useful search terms.

BMW instrument clusters – Johnson Controls

Johnson Controls supplied instrument clusters for selected BMW models. These units can carry both a manufacturer reference and BMW-specific identification numbers.

For example, the BMW 3 Series 320i cluster 1025330-62 / 912259401 / IK9122594015 combines several identifiers.

Important references:

• Johnson Controls 1025330-62,
• 102533062,
• 9 122 594-01,
• 912259401,
• IK9122594015.

There is also a BMW E81 / E87 2.0 diesel cluster 1024952-85 / 916682102.

Even when the manufacturer and housing are similar, BMW cluster numbers should be compared in full.

Kia instrument clusters – 94003 numbers

Kia commonly uses OEM numbers beginning with 94003... for instrument cluster assemblies.

An example is the Kia Soul instrument cluster 94003-2K411.

The number may be written as:

• 94003-2K411,
• 940032K411.

When searching for a replacement, both number formats can be useful.

Opel instrument clusters

Opel instrument clusters also exist in many versions that should be identified by the complete GM / Opel number.

Examples include the Opel Astra G instrument cluster 24459712 and the Opel Antara cluster 95489441.

The same vehicle family can contain several dashboard versions, so the model name alone is not sufficient for selection.

Instrument cluster manufacturers

Depending on the vehicle, clusters in the catalogue may come from manufacturers such as:

• Visteon,
• Magneti Marelli,
• Siemens,
• Johnson Controls,
• Denso,
• VDO / Continental,
• Sagem,
• other original equipment suppliers.

The manufacturer reference can be especially useful when more than one OEM number appears on the unit.

Analogue and electronic instrument clusters

Older clusters may primarily use analogue gauges and warning lamps, while newer units can combine analogue needles with digital displays or fully electronic screens.

Depending on the design, the cluster may display:

• vehicle speed,
• engine speed,
• fuel level,
• coolant temperature,
• warning and information lights,
• trip information,
• odometer information,
• service messages,
• gearbox information,
• vehicle status messages.

Common symptoms of an instrument cluster fault

Possible symptoms may include:

• completely blank dashboard,
• intermittent operation,
• incorrect or non-working gauges,
• speedometer not working,
• tachometer not working,
• missing display segments or pixels,
• flickering backlight,
• warning lamps operating incorrectly,
• loss of communication with the cluster,
• electronic internal fault codes.

These symptoms do not automatically prove that the instrument cluster itself is faulty.

Speedometer not working – is the cluster always faulty?

No. A missing speed indication can also be caused by another system supplying vehicle-speed information.

Depending on the vehicle, it may be worth checking:

• wheel-speed information,
• ABS / ESP system faults,
• vehicle communication network,
• power and ground supply,
• connectors and wiring,
• related sensors.

Diagnosis before replacement helps avoid replacing a correctly functioning cluster.

What should be checked before replacing an instrument cluster?

Before fitting another cluster, check:

• power supply,
• ground connections,
• fuses,
• electrical connectors,
• damaged or corroded pins,
• CAN or other communication lines,
• vehicle-side diagnostic fault codes.

Does a replacement instrument cluster require coding?

Not every instrument cluster uses the same replacement procedure.

Depending on the vehicle, a replacement unit may require:

• coding to the vehicle configuration,
• diagnostic adaptation,
• configuration transfer,
• synchronisation with other vehicle modules,
• software configuration or other manufacturer-specific procedures.

Other clusters may require less preparation. The correct procedure depends on the vehicle and the specific cluster.

Instrument cluster and vehicle security systems

In some vehicles, the instrument cluster can communicate with security, immobiliser or vehicle-identification systems. Replacing such a cluster may therefore require additional adaptation.

This is not universal. Compatibility and preparation requirements should be checked for the specific part number and vehicle.

Instrument cluster mileage information

Some instrument clusters store or display odometer information. Depending on vehicle architecture, mileage-related data may also be stored or verified by other control modules.

When replacing a cluster, any configuration of mileage information must be carried out in accordance with applicable law and the documented history of the vehicle.

km/h and mph instrument clusters

Instrument clusters can differ according to the market for which the vehicle was produced. The main speed scale may be shown in km/h, mph or both.

When ordering a replacement dashboard, check the visible scale and market version in addition to the electronic part number.

Why the engine and gearbox version can matter

Clusters for the same vehicle model may contain different displays, warning indicators, tachometer scales or gearbox information.

For this reason, when available, it is useful to provide:

• vehicle model,
• engine type,
• fuel type,
• manual or automatic transmission,
• production year.

These details support identification, but the complete cluster number remains the primary reference.

How to search for an instrument cluster by part number

Useful search combinations include:

• Audi A6 instrument cluster 4F0920933J 4F0910930C,
• Audi speedometer 8P0980930F,
• Ford Fiesta cluster 8A6T10849EL VP8A6F10849EM,
• Ford Focus instrument cluster BM5T10849AL,
• BMW instrument cluster 102533062 912259401,
• BMW E87 speedometer 102495285 916682102,
• Kia Soul instrument cluster 940032K411,
• Opel Astra G speedometer 24459712.

Searching with the complete OEM and manufacturer numbers normally gives more accurate results than using only the vehicle model.

Selected instrument clusters in the Auto24Parts catalogue

Examples from different manufacturers include the Audi A6 4F0920933J / 4F0910930C cluster, the BMW Johnson Controls 1025330-62 / 912259401 cluster, the Ford Fiesta Visteon 8A6T-10849-EL cluster and the Kia Soul 94003-2K411 instrument cluster.

Related electronic car parts

• Electronic Car Parts
• Vehicle Control Modules
• Engine Control Units – ECU
• ABS / ESP / ASR Control Units
• Complete ABS Pumps
• Automatic Transmission Control Units

How to confirm compatibility before ordering

If you are unsure which dashboard cluster is correct, contact Auto24Parts.

For compatibility verification, send:

• a clear photo of the complete original instrument cluster label,
• all OEM numbers,
• manufacturer number,
• vehicle make and model,
• production year,
• engine version,
• transmission type if relevant.

The complete part numbers from the original unit are more reliable than the vehicle model alone.

Ordering, Payment, Delivery and Returns

Information about ordering is available in our How to Buy guide. Payment options are listed under Secure Payment Methods, while shipping information can be found on the Shipping & Delivery page.

Current information about returns, complaints and warranty is available under Returns, Warranty & Complaints.

FAQ – Instrument Clusters and Speedometers